chc05dude
06-29-2004, 06:13 AM
Alright, well im using Cluster Knoppix (a little different kernel, "2.4.22-openmosix-2") It's Basically Knoppix v3.3, because i couldn't get v3.4 to HD-install. anyway i can't get my current WLAN 802.11b card to work, here's what 'lspci -v' tells me about my card:
01:07.0 Network controller: Texas Instruments ACX 100 22Mbps Wireless
Interface Subsystem: D-Link System Inc.: Unknown Device 3b01
Flags: bus master, medium devsel, latency 32, IRQ5
I/O ports at c000 [size=32]
Memory at e3011000 (32-bit, non-prefetchable) [size=4k]
Memory at e3000000 (32-bit, non-prefetchable) [size=64k]
Capabilities: [40] Power Management version 2
Can anyone help? The card name is DWL-520+
On another note the only ethernet card that will send a DHCP broadcast is my old Linksys card. The Int. 10/100 card doesn't work. I'm guessing it would be eth1 since the Linksys is eth0. How do i tell Linux to send the DHCP broadcast form eth1 and not eth0?
01:07.0 Network controller: Texas Instruments ACX 100 22Mbps Wireless
Interface Subsystem: D-Link System Inc.: Unknown Device 3b01
Flags: bus master, medium devsel, latency 32, IRQ5
I/O ports at c000 [size=32]
Memory at e3011000 (32-bit, non-prefetchable) [size=4k]
Memory at e3000000 (32-bit, non-prefetchable) [size=64k]
Capabilities: [40] Power Management version 2
Can anyone help? The card name is DWL-520+
On another note the only ethernet card that will send a DHCP broadcast is my old Linksys card. The Int. 10/100 card doesn't work. I'm guessing it would be eth1 since the Linksys is eth0. How do i tell Linux to send the DHCP broadcast form eth1 and not eth0?