Another Orinoco oddity.....13e but no Kismet

[BillS]

Another oddity..... Knoppix 3.6, 2.6 kernel
---Orinoco card inserted --Xconsole---


Aug 31 08:55:23 away2 cardmgr[1246]: socket 1: Lucent Technologies WaveLAN/IEEE Adapter
Aug 31 08:55:23 away2 kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean.
Aug 31 08:55:23 away2 cardmgr[1246]: executing: 'modprobe hermes'
Aug 31 08:55:23 away2 cardmgr[1246]: executing: 'modprobe orinoco'
Aug 31 08:55:23 away2 kernel: orinoco.c 0.13e (David Gibson <hermes@gibson.dropbear.id.au> and others)
Aug 31 08:55:23 away2 cardmgr[1246]: executing: 'modprobe orinoco_cs'
Aug 31 08:55:23 away2 kernel: orinoco_cs.c 0.13e (David Gibson <hermes@gibson.dropbear.id.au> and others)
Aug 31 08:55:23 away2 kernel: eth1: Station identity 001f:0001:0008:0048
Aug 31 08:55:23 away2 kernel: eth1: Looks like a Lucent/Agere firmware version 8.72
Aug 31 08:55:23 away2 kernel: eth1: Ad-hoc demo mode supported
Aug 31 08:55:23 away2 kernel: eth1: IEEE standard IBSS ad-hoc mode supported
Aug 31 08:55:23 away2 kernel: eth1: WEP supported, 104-bit key
Aug 31 08:55:23 away2 kernel: eth1: MAC address 00:02:2D:A8:80:81
Aug 31 08:55:23 away2 kernel: eth1: Station name "HERMES I"
Aug 31 08:55:23 away2 kernel: eth1: ready
Aug 31 08:55:23 away2 kernel: eth1: index 0x01: Vcc 5.0, irq 3, io 0x0100-0x013f
Aug 31 08:55:23 away2 cardmgr[1246]: executing: './network start eth1'
Aug 31 08:55:23 away2 cardmgr[1246]: + Sample private network setup
Aug 31 08:55:23 away2 cardmgr[1246]: + /sbin/ifconfig eth1 up
Aug 31 08:55:23 away2 cardmgr[1246]: + /sbin/pump -i eth1 > /dev/null
Aug 31 08:55:23 away2 pumpd[1100]: PUMP: sending discover
Aug 31 08:55:34 away2 kernel: eth1: no IPv6 routers present
Aug 31 08:55:43 away2 cardmgr[1246]: + Operation failed.


Looks good, 13e is the patched version??

--iwpriv----


eth1 Available private ioctl :
force_reset (8BE0) : set 0 & get 0
card_reset (8BE1) : set 0 & get 0
set_port3 (8BE2) : set 1 int & get 0
get_port3 (8BE3) : set 0 & get 1 int
set_preamble (8BE4) : set 1 int & get 0
get_preamble (8BE5) : set 0 & get 1 int
set_ibssport (8BE6) : set 1 int & get 0
get_ibssport (8BE7) : set 0 & get 1 int
dump_recs (8BFF) : set 0 & get 0

No monitor .... no Kismet....
Do I have to patch this dirver, or rebuild a kernel?



root@away2:~# apt-cache search orinoco
hostap-source - Host AP driver for Intersil Prism2/2.5/3
kismet - Wireless 802.11b monitoring tool
wavemon - Wireless Device Monitoring Application
orinoco - Orinoco and Prism 2 wireless card driver with monitor support

root@away2:~# apt-get install orinoco
Reading Package Lists... Done
Building Dependency Tree... Done
orinoco is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 175 not upgraded.

This say I have the 'monitor' version installed.


BillS