xine on knoppix 3.3 will not play dvds

[needhelpNOW]

it will play the start of my dvd, the 1st 5 seconds, and i get the FBI warning, then it shuts down, and closes, xine, i don't know what to do.

i have no clue about linux, all i know, is i have no sound on Windows, buti have sound on my linux cd, so i would like to watch a dvd, since i cant on windows :(, well can't with sound

any help would be appreciated, i will wait for someone to respond, if you would like, you can also email me at newfs4life@gmail.com

Thanks.

[eon]

There are several threads on this issue. Take a look at this thread:

http://www.knoppix.net/forum/viewtopic.php?p=63211

If you are still unable to play your dvd's please provide error messages.
By error messages I mean that you can run applications from the terminal or shell and if there are problems there will be some kind of output created.

One more thing; if you open a terminal ( it's the little monitor looking icon with a ">" prompt )
You can enter the following command (without the quotation marks ) "xine-check" and the software with xine will tell you what it needs to run correctly. Hope this helps.

[Cuddles]

I have a "similar" problem, with Kaffeine, but then again, Kaffeine uses the same "background" engine that Xine uses - so they are similar issues...

I can play a DVD movie, and it "appears" that when the movie has a "glitch" or "hiccup", where a normal TV DVD player will go through a "skip", the computer DVD player will crash, usually with an error stating that "the source can not be read, possibly no disc" message.

I posted this error to the Kaffeine Forums, and the response was that it is a problem with the libs that are used by Xine - its that same lib that you must get "special" to get DVD's to play, the libcss2 something... The resolve is to live with it, until the lib is updated -=- someday...

My problem may be the same as yours is, but with a different "front-end" player, even though both Xine and Kaffeine use the same "Xine" engine in the "background" - this "glitch" can happen right at the start of the play, in the middle, during a menu selection, you name it... and if I just hit "play" again, sometimes it will continue fine, or lock the complete system up... Possibly an updated lib is out there already, even though every DOC and HOWTO always points to the same version, even my own documentation has a specific wget version in it...

Your problem may be the lib issue, try starting a Konsole window, and running xine in that window, when it crashes the next time, it should dump somthing to that window on what the problem is, or what caused it to crash...

Hope this helps,
Ms. Cuddles

[needhelpNOW]

Ill type what i see, and maybe somebody can tell me what the problem is?

i also got "libdvdcss2_1.2.8-1_i386.deb" but no idea how to move it from my "download manager" to where it must go, where ever that may be

knoppix@ttyp0[knoppix]$ xine
This is xine (X11 gui) - a free video player v0.9.22.
(c) 2000-2003 The xine Team.
Built with xine library 1.0.0 (1-rc0a)
Found xine library version: 1.0.0 (1-rc2).
XServer Vendor: The XFree86 Project, Inc. Release: 40300000,
Protocol Version: 11, Revision: 0,
Available Screen(s): 1, using 0
Depth: 16.
XShmQueryVersion: 1.1.
-[ xiTK version 0.10.5 ]-
-[ xiTK will use XShm ]-
-[ WM type: (EWMH) KWIN {KWin} ]-
Display is not using Xinerama.
main: probing <aadxr3> video output plugin
main: probing <dxr3> video output plugin
dxr3_scr: Failed to open control device /dev/em8300-0 (No such file or directory)
main: probing <xv> video output plugin
main: probing <SyncFB> video output plugin
video_out_syncfb: aborting. (unable to open syncfb device "/dev/syncfb")
main: probing <xshm> video output plugin
xine_interface: unknown param 10
xine_interface: unknown param 10
xine_interface: unknown param 10
xine_interface: unknown param 10
video_out_xshm: tried to set unsupported property 2
libdvdnav: Using dvdnav version 1-rc2 from http://xine.sf.net
libdvdread: Encrypted DVD support unavailable.
libdvdnav: DVD Title: KILL_BILL_VOL2
libdvdnav: DVD Serial Number: 30ce7b17
libdvdnav: DVD Title (Alternative): KILL_BILL_VOL2
libdvdnav: Unable to find map file '/home/knoppix/.dvdnav/KILL_BILL_VOL2.map'
libdvdnav: DVD disk reports itself with Region mask 0x00f60000. Regions: 1 4
load_plugins: plugin dxr3-spudec failed to instantiate itself.
libspudec:init_plugin called

*** libdvdread: CHECK_VALUE failed in ifo_read.c:1522 ***
*** for info_length % sizeof(uint32_t) == 0 ***

libdvdnav: ifoRead_TITLE_VOBU_ADMAP vtsi failed - CRASHING
xine: vm.c:224: ifoOpenNewVTSI: Assertion `0' failed.
Aborted

[eon]

"dpkg -i libdvdcss2_1.2.8-1_i386.deb" should install the package.
(dpkg might want the exact location of the file e.g /usr/local/downloads/libdvd....)

You may need libdvdread too.

"xine-check" will give a run down of what's needed/missing.

[needhelpNOW]

dpkg -i '//home/knoppix/libdvdcss2_1.2.8-1_i386.deb' ;echo RESULT=$?
dpkg: unable to access dpkg status area: Read-only file system
RESULT=2

? i dunno if im installing this right, but i want to throw this out, BUT I WANT TO WATCH MY DVD lol

knoppix@ttyp1[knoppix]$ xine-check
Please be patient, this script may take a while to run...
[ good ] you're using Linux, doing specific tests
[ good ] looks like you have a /proc filesystem mounted.
[ good ] You seem to have a reasonable kernel version (2.4.22-xfs)
[ good ] intel compatible processor, checking MTRR support
[ good ] you have MTRR support and there are some ranges set.
[ good ] found the player at /usr/bin/xine
[ good ] /usr/bin/xine is in your PATH
[ hint ] No xine-config found. Assuming xine from Debian package
The xine-config script can be used to deternime some file locations
used by xine-lib, but you don't have such a script on your system.
However, it looks like you installed xine from the Debian packages.
So I'll just guess that you are using the standard locations.
If you want me to be sure about those file locations, you can install
the 'libxine-dev' package, which contains xine-config. However, this
package is not really needed to run xine...
press <enter> to continue...

[ good ] plugin directory /usr/lib/xine/plugins exists.
[ good ] found unknown plugin: *.so
/usr/bin/xine-check: line 1: =$ *: command not found
[OUCH!!] There are no input plugins.
xine needs at least one input plugin, but none is installed.
You should probably reinstall xine-lib...
press <enter> to continue...

[OUCH!!] There are no demux plugins.
xine needs at least one demux plugin, but none is installed.
You should probably reinstall xine-lib...
press <enter> to continue...

[OUCH!!] There are no decoder plugins.
xine needs at least one decoder plugin, but none is installed.
You should probably reinstall xine-lib...
press <enter> to continue...

[OUCH!!] There are no video_out plugins.
xine needs at least one video_out plugin, but none is installed.
You should probably reinstall xine-lib...
press <enter> to continue...

[OUCH!!] There are no audio_out plugins.
xine needs at least one audio_out plugin, but none is installed.
You should probably reinstall xine-lib...
press <enter> to continue...

[ good ] skin directory /usr/share/xine/skins exists.
[ good ] found logo in /usr/share/xine/skins
[ good ] I even found some skins.
[ good ] /dev/cdrom points to /dev/scd0
[ good ] /dev/dvd points to /dev/scd0
[ hint ] Your DVD drive seems not to be attached via ATAPI.
This might be due to the use of an ide-scsi emulation.
If you really have a SCSI DVD drive, your SCSI controller is likely
to do perfect DMA, so there's no reason to worry about this.
However, if you're using ide-scsi, there is a chance that DMA is
disabled for the DVD drive. Moreover, I don't know how to enable
DMA in that case, so you probably have to live with some performance
loss. (FIXME: check for /proc/ide, provide solution)
press <enter> to continue...

[ good ] found xvinfo: X-Video Extension version 2.2
[ hint ] Your X server doesn't support YUV overlays.
That means xine will have to to color space transformation and scaling
in software, which is quite CPU intensive. Maybe upgrading your
X server will help here.
If you have an ATI card, you'll find accelerated X servers on
http://www.linuxvideo.org/gatos/
press <enter> to continue...

[ hint ] Your X server doesn't support packed YUV overlays.
That means xine will have to to color space transformation and scaling
in software, which is quite CPU intensive. Maybe upgrading your
X server will help here.
If you have an ATI card, you'll find accelerated X servers on
http://www.linuxvideo.org/gatos/
press <enter> to continue...

[ hint ] Your X server doesn't have any XVideo support...
XVideo is an X server extension introduced by XFree86 4.x. This
extension provides access to hardware accelerated color space
conversion and scaling, which gives a great performance boost.
If you have a fast (>1GHz) machine, you may be able to watch all
kinds of video, anyway. You will waste lots of CPU cycles, though...
press <enter> to continue...
~

suggestions? xine DOES work to play the files i have on my computer, my .mpeg's and such

[eon]

"dpkg: unable to access dpkg status area: Read-only file system"

hmm... I'm not sure what that means. Are you running knoppix from your hard drive?

(I hope..) Also try the command again as root, and see what happens then.

You could also use the kpackage package manager to install libdvdcss... since its a GUI it might be preferable. Let us know how you make out, and good luck.

I understand you want to play your dvd's. Linux does have a learning curve which "throws"
some people, but it's advantages are huge if you stick with it. ( Consider this statement a linux promotion if you want)

[needhelpNOW]

i am running it from disk.....

[eon]

i am running it from disk.....


If you have a hard drive installation of knoppix you should be able to install the required dvd library i.e libdvdcss...either by using kpackage or dpkg -i at the command line.

I have xine working on both knoppix 3.3 & 3.4 so it can be done.