Axiomatico
11-02-2004, 11:43 AM
Well hereīs a real challenge!!!!!!!!!!!!!!!!!!!!!!!!!!!:
Iīve got a Pcchips 748 LMRT mobo PIII 450Mhz slot 1 (all onboard Puaj!!) with 128 Mb of RAM (8 shared with VGA card), Hd 8 Gb Samsung 5400 RPM, Samsung cd-r, Sony (lite-on) Cd-rw, Intel chipset modem 56K I think itīs a winmodem, cause it needs drivers to work in W$ mill edit.
Iīve tried Knoppix 3.3 first, but i canīt reach even the part when it puts:
Welcome to knoppix live-on-cd!!
Iīve been booting using this lines:
Knoppix vga=normal screen=800x600 mem=120M (my mobo shares 8Mb) noscsi noapm noapic acpi=off
Nothing!!!!!!!!!!!!!!!!!!!!!
Well I thought it was the scsi emulation, so iīve download the 3.6 version in orther to use the 2.6 kernell, and I can only reach the part WELCOME TO....................
The cd is OK it works in EVERY computer exept mine.
I donīt use vga=normal Anymore, cause I can see tux when it starts. I just donīt know what to do.
iīve flashed the bios, read every cheat code, believe me it is very frustrating.
now I use
knoppix26 mem=120M noscsi noapic acpi=off dma (the new bios has dma acceleration enable) noapm lang=es desktop=icewm
:?: ANY SUGEST!!!!!??????????????????? :?:
Iīve tried nodma and expert26, but I can reach only the same part i said in the previous post.
I also tried memtest, and there are no errors.
I was thinking in installing a Debbian linux but it fears me cause if a debbian base (Knoppix) doesnīt work, Debbian wonīt work too!
Heres a problem Iīve got for some time, I donīt know if it could be useful, the date an the time goes crazy every time, but I donīt get any advice of battery low in the bios, and the bios config doesnīt get erased.
THANK YOU!!!!
ASK WHAT YOU WANT I WILL REPLY EVERITHING!!!!!!!!!!!!!! :roll: :?:
Iīve got a Pcchips 748 LMRT mobo PIII 450Mhz slot 1 (all onboard Puaj!!) with 128 Mb of RAM (8 shared with VGA card), Hd 8 Gb Samsung 5400 RPM, Samsung cd-r, Sony (lite-on) Cd-rw, Intel chipset modem 56K I think itīs a winmodem, cause it needs drivers to work in W$ mill edit.
Iīve tried Knoppix 3.3 first, but i canīt reach even the part when it puts:
Welcome to knoppix live-on-cd!!
Iīve been booting using this lines:
Knoppix vga=normal screen=800x600 mem=120M (my mobo shares 8Mb) noscsi noapm noapic acpi=off
Nothing!!!!!!!!!!!!!!!!!!!!!
Well I thought it was the scsi emulation, so iīve download the 3.6 version in orther to use the 2.6 kernell, and I can only reach the part WELCOME TO....................
The cd is OK it works in EVERY computer exept mine.
I donīt use vga=normal Anymore, cause I can see tux when it starts. I just donīt know what to do.
iīve flashed the bios, read every cheat code, believe me it is very frustrating.
now I use
knoppix26 mem=120M noscsi noapic acpi=off dma (the new bios has dma acceleration enable) noapm lang=es desktop=icewm
:?: ANY SUGEST!!!!!??????????????????? :?:
Iīve tried nodma and expert26, but I can reach only the same part i said in the previous post.
I also tried memtest, and there are no errors.
I was thinking in installing a Debbian linux but it fears me cause if a debbian base (Knoppix) doesnīt work, Debbian wonīt work too!
Heres a problem Iīve got for some time, I donīt know if it could be useful, the date an the time goes crazy every time, but I donīt get any advice of battery low in the bios, and the bios config doesnīt get erased.
THANK YOU!!!!
ASK WHAT YOU WANT I WILL REPLY EVERITHING!!!!!!!!!!!!!! :roll: :?: