ggiaretta
11-21-2004, 10:11 AM
I have installed knoppix on a Dell Inspirion 8250.
Knoppix works well except the sound does not work.
I get the following error message:
Sound server informational message:
Error while initializing the sound driver:
can't start sound i/o
The sound server will continue, using the null output device.
Here is my harware configuration:
0000:00:00.0 Host bridge: Intel Corp. 82850 850 (Tehama) Chipset Host Bridge (M
CH) (rev 04)
Subsystem: Dell: Unknown device 0145
Flags: bus master, fast devsel, latency 0
Memory at e0000000 (32-bit, prefetchable) [size=128M]
Capabilities: <available only to root>
0000:00:01.0 PCI bridge: Intel Corp. 82850 850 (Tehama) Chipset AGP Bridge (rev
04) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: ff800000-ff9fffff
Prefetchable memory behind bridge: e8000000-f7ffffff
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 04) (prog-if 00 [Nor
mal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: ff600000-ff7fffff
Prefetchable memory behind bridge: f8000000-f80fffff
0000:00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 04)
Flags: bus master, medium devsel, latency 0
0000:00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 04) (prog-if 80 [
Master])
Subsystem: Dell: Unknown device 0145
Flags: bus master, medium devsel, latency 0
I/O ports at ffa0 [size=16]
0000:00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 04)
Subsystem: Dell: Unknown device 0145
Flags: medium devsel, IRQ 17
I/O ports at ccf0 [size=16]
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R300 NE [Ra
deon 9500 Pro] (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 3002
Flags: bus master, stepping, 66MHz, medium devsel, latency 64, IRQ 16
Memory at f0000000 (32-bit, prefetchable) [size=128M]
I/O ports at ec00 [size=256]
Memory at ff8f0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at 80000000 [disabled] [size=128K]
Capabilities: <available only to root>
0000:01:00.1 Display controller: ATI Technologies Inc Radeon R300 [Radeon 9500
Pro] (Secondary)
Subsystem: ATI Technologies Inc: Unknown device 3003
Flags: bus master, stepping, 66MHz, medium devsel, latency 64
Memory at e8000000 (32-bit, prefetchable) [size=128M]
Memory at ff8e0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <available only to root>
0000:02:01.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Cont
roller (rev 50) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 64, IRQ 19
I/O ports at dce0 [size=32]
Capabilities: <available only to root>
0000:02:01.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Cont
roller (rev 50) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 64, IRQ 18
I/O ports at dcc0 [size=32]
Capabilities: <available only to root>
0000:02:01.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) (prog-if 2
0 [EHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID): Unknown device 1234
Flags: bus master, medium devsel, latency 64, IRQ 16
Memory at ff6ffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>
0000:02:02.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Cont
roller (rev 50) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 64, IRQ 18
I/O ports at dca0 [size=32]
Capabilities: <available only to root>
0000:02:02.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Cont
roller (rev 50) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 64, IRQ 17
I/O ports at dc80 [size=32]
Capabilities: <available only to root>
0000:02:02.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) (prog-if 2
0 [EHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID): Unknown device 1234
Flags: bus master, medium devsel, latency 64, IRQ 19
Memory at ff6ff800 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>
0000:02:07.0 Multimedia video controller: Brooktree Corporation Bt878 Video Cap
ture (rev 11)
Subsystem: Avermedia Technologies Inc AVerTV WDM Video Capture
Flags: bus master, medium devsel, latency 64, IRQ 16
Memory at f80ff000 (32-bit, prefetchable) [size=4K]
Capabilities: <available only to root>
0000:02:07.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (
rev 11)
Subsystem: Avermedia Technologies Inc AVerTV WDM Audio Capture
Flags: bus master, medium devsel, latency 64, IRQ 16
Memory at f80fe000 (32-bit, prefetchable) [size=4K]
Capabilities: <available only to root>
0000:02:08.0 Modem: Broadcom Corporation BCM4212 v.90 56k modem (rev 02) (prog-
if 00 [Generic])
Subsystem: Dell: Unknown device 0002
Flags: bus master, fast devsel, latency 64, IRQ 17
Memory at ff6fe000 (32-bit, non-prefetchable) [size=4K]
I/O ports at dc70 [size=16]
Capabilities: <available only to root>
0000:02:09.0 Multimedia audio controller: Creative Labs [SB Live! Value] EMU10k 1X
Subsystem: Creative Labs: Unknown device 1003
Flags: bus master, medium devsel, latency 64, IRQ 18
I/O ports at dc40 [size=32]
Capabilities: <available only to root>
0000:02:09.1 Input device controller: Creative Labs [SB Live! Value] Input devi ce controller
Subsystem: Creative Labs: Unknown device 1003
Flags: bus master, medium devsel, latency 64
I/O ports at dc68 [size=8]
Capabilities: <available only to root>
0000:02:0c.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 10)
Subsystem: Dell: Unknown device 0145
Flags: bus master, medium devsel, latency 64, IRQ 18
Memory at ff6fd000 (32-bit, non-prefetchable) [size=4K]
I/O ports at dc00 [size=64]
Memory at ff6c0000 (32-bit, non-prefetchable) [size=128K]
Capabilities: <available only to root>
Can anyone help me? I am new to linux
Thanks
Knoppix works well except the sound does not work.
I get the following error message:
Sound server informational message:
Error while initializing the sound driver:
can't start sound i/o
The sound server will continue, using the null output device.
Here is my harware configuration:
0000:00:00.0 Host bridge: Intel Corp. 82850 850 (Tehama) Chipset Host Bridge (M
CH) (rev 04)
Subsystem: Dell: Unknown device 0145
Flags: bus master, fast devsel, latency 0
Memory at e0000000 (32-bit, prefetchable) [size=128M]
Capabilities: <available only to root>
0000:00:01.0 PCI bridge: Intel Corp. 82850 850 (Tehama) Chipset AGP Bridge (rev
04) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: ff800000-ff9fffff
Prefetchable memory behind bridge: e8000000-f7ffffff
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 04) (prog-if 00 [Nor
mal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: ff600000-ff7fffff
Prefetchable memory behind bridge: f8000000-f80fffff
0000:00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 04)
Flags: bus master, medium devsel, latency 0
0000:00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 04) (prog-if 80 [
Master])
Subsystem: Dell: Unknown device 0145
Flags: bus master, medium devsel, latency 0
I/O ports at ffa0 [size=16]
0000:00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 04)
Subsystem: Dell: Unknown device 0145
Flags: medium devsel, IRQ 17
I/O ports at ccf0 [size=16]
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R300 NE [Ra
deon 9500 Pro] (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 3002
Flags: bus master, stepping, 66MHz, medium devsel, latency 64, IRQ 16
Memory at f0000000 (32-bit, prefetchable) [size=128M]
I/O ports at ec00 [size=256]
Memory at ff8f0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at 80000000 [disabled] [size=128K]
Capabilities: <available only to root>
0000:01:00.1 Display controller: ATI Technologies Inc Radeon R300 [Radeon 9500
Pro] (Secondary)
Subsystem: ATI Technologies Inc: Unknown device 3003
Flags: bus master, stepping, 66MHz, medium devsel, latency 64
Memory at e8000000 (32-bit, prefetchable) [size=128M]
Memory at ff8e0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <available only to root>
0000:02:01.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Cont
roller (rev 50) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 64, IRQ 19
I/O ports at dce0 [size=32]
Capabilities: <available only to root>
0000:02:01.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Cont
roller (rev 50) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 64, IRQ 18
I/O ports at dcc0 [size=32]
Capabilities: <available only to root>
0000:02:01.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) (prog-if 2
0 [EHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID): Unknown device 1234
Flags: bus master, medium devsel, latency 64, IRQ 16
Memory at ff6ffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>
0000:02:02.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Cont
roller (rev 50) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 64, IRQ 18
I/O ports at dca0 [size=32]
Capabilities: <available only to root>
0000:02:02.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Cont
roller (rev 50) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 64, IRQ 17
I/O ports at dc80 [size=32]
Capabilities: <available only to root>
0000:02:02.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) (prog-if 2
0 [EHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID): Unknown device 1234
Flags: bus master, medium devsel, latency 64, IRQ 19
Memory at ff6ff800 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>
0000:02:07.0 Multimedia video controller: Brooktree Corporation Bt878 Video Cap
ture (rev 11)
Subsystem: Avermedia Technologies Inc AVerTV WDM Video Capture
Flags: bus master, medium devsel, latency 64, IRQ 16
Memory at f80ff000 (32-bit, prefetchable) [size=4K]
Capabilities: <available only to root>
0000:02:07.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (
rev 11)
Subsystem: Avermedia Technologies Inc AVerTV WDM Audio Capture
Flags: bus master, medium devsel, latency 64, IRQ 16
Memory at f80fe000 (32-bit, prefetchable) [size=4K]
Capabilities: <available only to root>
0000:02:08.0 Modem: Broadcom Corporation BCM4212 v.90 56k modem (rev 02) (prog-
if 00 [Generic])
Subsystem: Dell: Unknown device 0002
Flags: bus master, fast devsel, latency 64, IRQ 17
Memory at ff6fe000 (32-bit, non-prefetchable) [size=4K]
I/O ports at dc70 [size=16]
Capabilities: <available only to root>
0000:02:09.0 Multimedia audio controller: Creative Labs [SB Live! Value] EMU10k 1X
Subsystem: Creative Labs: Unknown device 1003
Flags: bus master, medium devsel, latency 64, IRQ 18
I/O ports at dc40 [size=32]
Capabilities: <available only to root>
0000:02:09.1 Input device controller: Creative Labs [SB Live! Value] Input devi ce controller
Subsystem: Creative Labs: Unknown device 1003
Flags: bus master, medium devsel, latency 64
I/O ports at dc68 [size=8]
Capabilities: <available only to root>
0000:02:0c.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 10)
Subsystem: Dell: Unknown device 0145
Flags: bus master, medium devsel, latency 64, IRQ 18
Memory at ff6fd000 (32-bit, non-prefetchable) [size=4K]
I/O ports at dc00 [size=64]
Memory at ff6c0000 (32-bit, non-prefetchable) [size=128K]
Capabilities: <available only to root>
Can anyone help me? I am new to linux
Thanks