Dell 8400 RAID 1 disk array not mounted

[JPWhite]

I can get knoppix to boot OK from CD, but the C drive of the WinXP NTFS partition does not get auto mounted by Knoppix.

I believe it's getting stuck because the twin SATA hard drives are in a RAID 1 array.

Any tricks for making Knoppix work with a SATA RAID array? Dell use an Intel RAID controller on the mobo.

JP

[JPWhite]

I can now boot and mount on a Dell 8400 witha SATA Raid1 array.

Requires Knoppix 3.8.2 and the cheatcode knoppix acpi=off

The individual disks mount as seperate hard drives, not as an array so writing to the disks would be a no-no but at least I know I can read them if the need arises in the future if windoze takes a dump.

The sound card is not recognized, but I can live with that for troubleshooting.

JP

[Harry Kuhman]

The individual disks mount as seperate hard drives, not as an array so writing to the disks would be a no-no but at least I know I can read them if the need arises in the future if windoze takes a dump.
You may be able to read directories, but if you have a normal raid array with files split across drives (rather than just a redundant copy of one disk on the other), then I doubt if you can actually recover any large files (files large enough to span across drives).