hotrodedmonds
02-10-2005, 02:42 PM
Here is my problem. I have a Maxtor SATA/150 PCI card, however my drive is connected to the Ultra ATA 133 port. Card has 2 SATA and 1 ATA port. When Knoppix boots, I see it loading the 2 SATA ports as SCSI1 SCSI0, but it never loads the 3rd ( middle ) port. Is there a seperate driver for this port? I know the hardware sees the drive. The drive is a Maxtor Ultra 9 Plus 250GB /133 ATA. Any help would be appreciated.