KnoppyKate
03-18-2005, 07:59 PM
Any help would be appreciated. Here is the output from a few of the essentials I have seen on this forum. I need to recover data off this drive. I have a direct connection to another PC as a copy destination. I am fairly new to Linux, so details wouldn't hurt. Thanks!!!
dmesg|grep ATA
hda: HITACHI_DK23CA-20, ATA DISK, drive
hdc: TOSHIBA DVD-ROM SD-R2102, ATAPI CD/DVD-ROM drive
scsi0: SCSI host adapter emulation for IDE ATAPI devices
dmesg|grep hd
ide0: BM-DMA at 0xeff0-oxeff7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xeff8-0xefff, BIOS settings: hdc:DMA, hdd:pio
hda: HITACHI_DK23CA-20, ATA DISK drive
hdc: TOSHIBA DVD-ROM SDR2102, ATAPI CD/DVD-ROM drive
hda: attached ide-disk driver.
hda: host protected area =>1
hda: 39070080 sectors (20004 MB) w/2048KiB Cache, CHS=2432/255/63
hda: unknown partition table
hdc: attached ide-scsi driver
hda: hda1
dmesg|grep CD
sr0: scsi3-mmc drive:24x/24x writer cd/rw xa/form2 cdda tray
cloop: /cdrom/KNOPPIX/KNOPPIX: 30369 blocks, 65536 bytes/block, largest block is 65552 bytes
fdisk -l
Disk /dev/hda: 20.0 GB 20003880960 bytes
255 heads, 63 sectors/track, 2432 cylinders
Units=cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 2432 19535008+ 7 HPFS/NTFS
cat /etc/fstab
/proc /proc proc defaults 0 0
/sys /sys sysfs noauto 0 0
/dev/pts /dev/pts devpts mode=0622 0 0
/dev/fd0 /mnt/auto/floppy auto user, noauto,exec,umask=000 0 0
/dev/cdrom /mnt/auto/cdrom auto user, noauto,exec,ro 0 0
# Added by Knoppix
/dev/hda /mnt/hda auto noauto,users,exec 0 0
dmesg|grep mount
usbdevfs: remount parameter error
mount
/dev/root on / types ext2 (rw)
/dev/scd0 on /cdrom type iso9660 (ro)
/dev/cloop on KNOPPIX type iso9660 (ro)
/ramdisk on /ramdisk type tmpfs (rw, size=186340k)
/proc/bus/usb on /proc/bus/usb type usbdevfs (rw,devmode=0666)
automount(pid321) on /mnt/auto type autofs (rw,fd=4,pgrp=321,minproto=2,maxproto=4)
dmesg|grep ATA
hda: HITACHI_DK23CA-20, ATA DISK, drive
hdc: TOSHIBA DVD-ROM SD-R2102, ATAPI CD/DVD-ROM drive
scsi0: SCSI host adapter emulation for IDE ATAPI devices
dmesg|grep hd
ide0: BM-DMA at 0xeff0-oxeff7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xeff8-0xefff, BIOS settings: hdc:DMA, hdd:pio
hda: HITACHI_DK23CA-20, ATA DISK drive
hdc: TOSHIBA DVD-ROM SDR2102, ATAPI CD/DVD-ROM drive
hda: attached ide-disk driver.
hda: host protected area =>1
hda: 39070080 sectors (20004 MB) w/2048KiB Cache, CHS=2432/255/63
hda: unknown partition table
hdc: attached ide-scsi driver
hda: hda1
dmesg|grep CD
sr0: scsi3-mmc drive:24x/24x writer cd/rw xa/form2 cdda tray
cloop: /cdrom/KNOPPIX/KNOPPIX: 30369 blocks, 65536 bytes/block, largest block is 65552 bytes
fdisk -l
Disk /dev/hda: 20.0 GB 20003880960 bytes
255 heads, 63 sectors/track, 2432 cylinders
Units=cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 2432 19535008+ 7 HPFS/NTFS
cat /etc/fstab
/proc /proc proc defaults 0 0
/sys /sys sysfs noauto 0 0
/dev/pts /dev/pts devpts mode=0622 0 0
/dev/fd0 /mnt/auto/floppy auto user, noauto,exec,umask=000 0 0
/dev/cdrom /mnt/auto/cdrom auto user, noauto,exec,ro 0 0
# Added by Knoppix
/dev/hda /mnt/hda auto noauto,users,exec 0 0
dmesg|grep mount
usbdevfs: remount parameter error
mount
/dev/root on / types ext2 (rw)
/dev/scd0 on /cdrom type iso9660 (ro)
/dev/cloop on KNOPPIX type iso9660 (ro)
/ramdisk on /ramdisk type tmpfs (rw, size=186340k)
/proc/bus/usb on /proc/bus/usb type usbdevfs (rw,devmode=0666)
automount(pid321) on /mnt/auto type autofs (rw,fd=4,pgrp=321,minproto=2,maxproto=4)