PDA

View Full Version : 3.8.1 not install LILO



ottosykora
05-09-2005, 02:21 PM
The 3.8.1 installation on the hard drive has some problem. I did tick the intall LILO in the partition, it says it does it, but no LILO afterwards in the partition. When I try to produce a bootfloppy, also from here I can not boot the partition.

3.7 and 3.6 version do the job correctly.


is there any known issue about LILO and 3.8.1?

pgee
05-10-2005, 06:18 PM
I have the same problem...

I get some error, in the terminal during the install:

root@1[knoppix]# knx2hd

/usr/bin/mkdesktophdicons: line 42: cannot create temp file for here document: Permission denied
/usr/bin/mkdesktophdicons: line 100: cannot create temp file for here document: Permission denied
/usr/bin/mkdesktophdicons: line 100: cannot create temp file for here document: Permission denied
/usr/bin/mkdesktophdicons: line 100: cannot create temp file for here document: Permission denied
/usr/bin/mkdesktophdicons: line 100: cannot create temp file for here document: Permission denied
/usr/bin/mkdesktophdicons: line 100: cannot create temp file for here document: Permission denied
Can't open /mnt/hdinstall/home/pgee/.mozilla/default/*/prefs.js: No such file or directory.
/usr/sbin/alsactl: save_state:1194: No soundcards found...
/proc/misc: No entry for device-mapper found
Is device-mapper driver missing from kernel?
/dev/mapper/control: open failed: No such device
Failure to communicate with kernel device-mapper driver.
/proc/misc: No entry for device-mapper found
Is device-mapper driver missing from kernel?
/dev/mapper/control: open failed: No such device
Failure to communicate with kernel device-mapper driver.
Incompatible libdevmapper 1.00.20-ioctl (2005-01-06)(compat) and kernel driver
Warning: '/proc/partitions' does not match '/dev' directory structure.
Name change: '/dev/cloop0' -> '/dev/cloop'
Warning: Unable to determine video adapter in use in the present system.
Device 0x0300: Inconsistent partition table, 1st entry
CHS address in PT: 511:1:1 --> LBA (515151)
LBA address in PT: 8209278 --> CHS (8144:2:1)
Fatal: Either FIX-TABLE or IGNORE-TABLE must be specified
If not sure, first try IGNORE-TABLE (-P ignore)


What's wrong? I have no idea...

yosef
05-15-2005, 03:07 AM
I got several of those same errors from installing 3.8.1, but everything seemed to still install fine for me.
You might want to try using knoppix-installer instead of knx2hd?

ottosykora
05-17-2005, 11:11 PM
The problem seems not tobe in the boot sequence. Rather I think, either the lilo config is not correct somehow transfered or there are some kernel changes made later orsomething like that? It looks like the case when one does change the kernel after the installation of lilo.

I will try the lilo -r to fix it next time.


Last tiem I did try many times to install the knoppix 3.8.1 and every time the lilo failed. Also no boot from the floppy.

ottosykora
05-17-2005, 11:12 PM
... have called up the knoppix-installer

no change, still same

mehturt
05-20-2005, 07:43 AM
I have the exact same problem..
knoppix-install seems to install the data on the partition but not lilo.. I cannot install lilo manually either..