My new cdr rom doesnt boot knoppix live cd

[thewalkingman]

whereas my old one did

what is the best solution?

[garyng]

use the old one.

[thewalkingman]

The old one is toast :)

[Loper]

whereas my old one did. What is the best solution?
More info is in order. Give brand, model, etc. Some things to check in the meantime:

1. Make sure that it's recognized in the BIOS. Use setting auto, not none.
2. Make sure that DMA is enabled in the BIOS, if that setting is present.
3. Ensure that the master/slave settings are correct. If the CD-R is the only device on the secondary IDE buss, this isn't an issue.
4. Check your cable. If it's the cable select style, make sure that it's correctly connected. You can tell this type of cable by the hole in it, which disconnects one wire.

[thewalkingman]

http://www.cyberdrive.com/products.asp?Product=CW078D

[thewalkingman]

3. Ensure that the master/slave settings are correct. If the CD-R is the only device on the secondary IDE buss, this isn't an issue.

Fixed :oops:


It is good to talk these things out