PDA

View Full Version : Bluetooth-Modem wird nicht gefunden



hilmar
11-14-2005, 02:37 PM
Hallo,
habe ein Problem mit meinem Acer-Bluetooth-modem. Knoppix 3.6 erkennt das Modem (dev/modem/setup) , jedenfalls meistens. Manchmal beim ersten Versuch nicht, beim zweiten klappts meistens. Kppp - Einwahl funktioniert perfekt. Knoppix 4.0.2 findet kein Modem auch beim xten Versuch nicht.
Mach ich was falsch ? Bin ein echter Linux- Depp und brauche also echte Anfänger Hilfe.
Wer erbarmt sich meiner???

geoback
12-07-2005, 10:21 AM
Hallo,
hoffe das wird Dir weiterhelfen; bei mit hat es mit Epox
Bluetooth USB Dongle BT-DG02 geklappt unter Knoppix 3.4 !

knoppix@ttyp0[knoppix]$ sudo /etc/init.d/bluez-utils start
Starting bluez-utils: hcid rfcomm.
knoppix@ttyp0[knoppix]$ hciconfig
hci0: Type: USB
BD Address: 00:04:61:80:57:5F ACL MTU: 192:8 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:107 acl:0 sco:0 events:14 errors:0
TX bytes:300 acl:0 sco:0 commands:13 errors:0
knoppix@ttyp0[knoppix]$ hcitool scan
Scanning ...
00:60:57:4B:D3:E1 Nokia
knoppix@ttyp0[knoppix]$ sudo hcitool info 00:60:57:4B:D3:E1
Requesting information ...
BD Address: 00:60:57:4B:D3:E1
Device Name: Nokia
LMP Version: 1.1 (0x1) LMP Subversion: 0x23b
Manufacturer: Nokia Mobile Phones (1)
Features: 0xbf 0x28 0x21 0x00 0x00 0x00 0x00 0x00
<3-slot packets> <5-slot packets> <encryption> <slot offset>
<timing accuracy> <role switch> <sniff mode> <SCO link>
<HV3 packets> <CVSD>
knoppix@ttyp0[knoppix]$ rfcomm connect 0 00:60:57:4B:D3:E1
Connected /dev/rfcomm0 to 00:60:57:4B:D3:E1 on channel 1
Press CTRL-C for hangup