Eru_Ascar
12-10-2005, 12:51 AM
I'm new with linux and I tried to run knoppix 4.02 DVD on a Siemens-Fujitsu Econel 50 .
But it failed to detect the harddisk correctly. Its an SATA-Raid set with the build in SATA Raid controller.
I have no idea how to get this running. There is only an Icon (like an USB-Stick, that says (Festplatte sda) and i canot mount it. (Errormessage: mount could not find filesystem type and there was none specified)
Edited: I choosed the hardware raid with the SATA raid controller. But Knoppix still finds 2 hd's (sda and sdb) and not the Raid 1 device. Finally I was able to partition the hd's but both seperate and not, how I intended, as SATA hardware raid. It's an LSI-Logic SATA controller on board...
Thx for every suggestion!
But it failed to detect the harddisk correctly. Its an SATA-Raid set with the build in SATA Raid controller.
I have no idea how to get this running. There is only an Icon (like an USB-Stick, that says (Festplatte sda) and i canot mount it. (Errormessage: mount could not find filesystem type and there was none specified)
Edited: I choosed the hardware raid with the SATA raid controller. But Knoppix still finds 2 hd's (sda and sdb) and not the Raid 1 device. Finally I was able to partition the hd's but both seperate and not, how I intended, as SATA hardware raid. It's an LSI-Logic SATA controller on board...
Thx for every suggestion!