vahtryn
07-11-2006, 04:17 PM
I know these boxes are old, I'm installing gentoo on them. There's one that's giving me issues with my gentoo live disk (won't find a damn thing).
here's dmesg:
dmesg | grep ida
cpqarray: Finding drives on ida0<6>ts: Compaq touchscreen protocol output
cpqarray ida0: idaSendPciCmd Timeout out, No command list address returned!
cpqarray ida0: idaSendPciCmd Timeout out, No command list address returned!
lspci -v
0000:00:01.0 RAID bus controller: LSI Logic / Symbios Logic 53C1510 (rev 02)
Subsystem: Compaq Computer Corporation Integrated Array Controller
Flags: medium devsel, IRQ 3
I/O ports at 2000 [size=256]
Memory at c5000000 (32-bit, non-prefetchable) [size=16M]
Memory at c4000000 (32-bit, non-prefetchable) [size=16M]
Expansion ROM at 70000000 [disabled] [size=512K]
Capabilities: [40] Power Management version 2
root@2[ida]# fdisk -l /dev/ida/c0d0
root@2[ida]# fdisk /dev/ida/c0d0
Unable to read /dev/ida/c0d0
Now the thing is there are two reiserfs partitions already on this raid, there is also two gigs of swap. It should be able to see it.
Any ideas?
here's dmesg:
dmesg | grep ida
cpqarray: Finding drives on ida0<6>ts: Compaq touchscreen protocol output
cpqarray ida0: idaSendPciCmd Timeout out, No command list address returned!
cpqarray ida0: idaSendPciCmd Timeout out, No command list address returned!
lspci -v
0000:00:01.0 RAID bus controller: LSI Logic / Symbios Logic 53C1510 (rev 02)
Subsystem: Compaq Computer Corporation Integrated Array Controller
Flags: medium devsel, IRQ 3
I/O ports at 2000 [size=256]
Memory at c5000000 (32-bit, non-prefetchable) [size=16M]
Memory at c4000000 (32-bit, non-prefetchable) [size=16M]
Expansion ROM at 70000000 [disabled] [size=512K]
Capabilities: [40] Power Management version 2
root@2[ida]# fdisk -l /dev/ida/c0d0
root@2[ida]# fdisk /dev/ida/c0d0
Unable to read /dev/ida/c0d0
Now the thing is there are two reiserfs partitions already on this raid, there is also two gigs of swap. It should be able to see it.
Any ideas?