View Full Version : Help! My display won't change from 600 X 800!
juniorknopper
12-14-2006, 10:26 PM
Hi,
On both my hard drive and my bootable cd, I can't change my display from 600 X 800. When I go to display settings, there is only one option. :?
Can anyone help me? :cry:
juniorknopper
Assuming you downloaded an .iso, there should have been a file, knoppix-cheatcodes.txt.
When you boot up knoppix, you have an opportunity to enter these cheatcodes. As I recall, you should see
boot:
Try knoppix vga=normal screen=1024x768 or screen=1280x1024
Let people know if it works for you. Myself, my eyesight is poor enough I need 800x600.
antoni_NT
12-17-2006, 01:51 PM
I've tried to use the cheatcodes by adding line
knoppix vga=normal screen=1024x768 or screen=1280x1024
at boot option but it didn't and never work.
Help me please.
I'm not sure about this, but you didn't type the whole cheat as
knoppix vga=normal screen=1024x768 or screen=1280x1024
did you? I meant that the screen cheat could be either 1024x768 or 1280x1024, not both. This could be insufficient caffeine on my part.
Try: knoppix vga=normal screen=1024x768. If that doesn't look right, try knoppix vga=normal screen=1280x1024
Let me know if either works.
juniorknopper
12-18-2006, 07:11 AM
Whoops! I tried knoppix vga=1024x768 and knoppix screen=1024x768, but I guess that's wrong. :oops:
I'll try it.
juniorknopper
antoni_NT
12-18-2006, 10:13 AM
I'm sorry for writing
knoppix vga=normal screen=1024x768 or screen=1280x1024
I wrote
knoppix vga=normal screen=1024x768
on boot option. I'm using crt monitor that only works on resolution lower than 1152X768, because it is the highest resolution when I use it on Windows Platform.
Is there any possibility for unsupported vga card?
I'm using nVidia Ge Force MX 440.
I ever tried run Knoppix on an onboard based vga and it can play knoppix at 1024x768. It's not fear! I can't get enough space.
juniorknopper
12-18-2006, 07:04 PM
I wrote
knoppix vga=normal screen=1024x768
I tried it, and it didn't work. Maybe 1280x1024 will work.
:?
juniorknopper
juniorknopper
12-18-2006, 07:05 PM
I forgot to mention something... :roll:
on my hard drive the boot screen doesn't come up, so I am entering cheatcodes into the terminal.
will that work :?: :!: :?: :!:
juniorknopper
12-18-2006, 07:09 PM
to get a boot screen, maybe I should reinstall knoppix and not enter anything in the user/password field, because instead of a boot screen, I get a user/password field instead of the
boot:
will that work?
juniorknopper
Harry Kuhman
12-18-2006, 07:21 PM
on my hard drive the boot screen doesn't come up, so I am entering cheatcodes into the terminal.
will that work
No, installing Knoppix to a hard drive will not work, as you are learning.
antoni_NT
12-19-2006, 05:45 PM
To juniorknopper
I haven't tried it, but I guess my monitor won't support 1280x1024.
The highest resolution supported is 1152x768.
Come on, I'm sick of 800x600. It's so huge!
sakiZ
12-19-2006, 10:07 PM
640x480 - 785
800x600 - 788
1024x768 - 791 16 bit
1024x768 - 792 24 bit
1152x864 - 355
1280x1024 - 794
1600x1200 - 798
There is a different method for adjusting screen resolution at boot time. Use the vga=794 cheat code for example for 1280x1024 screen resolution. It may work better for you.
Above are some typical ones you could try.
Note, you have not said what kind of video card you are using. If it is something really old, say with only 4 mb of memory on the card, you may well be stuck with 800x600.
Hope this helps.
sakiZ
juniorknopper
01-20-2007, 08:33 PM
I fixed my screen problems! :D
all I did was enter (on the live cd) the cheatcode knoppix xmodule=i810, then, I did a knoppix installation. My hard drive installation's screen resolution is perfect!
juniorknopper
sakiZ
01-21-2007, 01:37 AM
Nothing more satisfying than finding the answer yourself.
I am not familiar with the xmodule cheatcode.
I'll have to store that in my archives somewhere.
sakiZ
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.