sli
01-18-2008, 03:40 PM
Hi,
I'm having problem with the mkfs.ext3. It looks like that it corrupts the partition table of my compactFlash disks connected thru the USB. Here's my test sequence:
- connect a 128MB compactFlash thru USB
- execute fdisk to print the partition table => there's a primary partition
- execute mkfs.ext3 to format the disk => seems OK but ...
- execute fdisk to check and verify => partition table corrupted.
I've done this sequence repeatly, and tried with several compactFlash disks. Same result with all the compactFlash disks that i tried. For information, the compactFlash is a ScanDisk 128MB.
See trace below.
Any ideas?
Kind regards,
Shaofeng
<Beginning of trace>
------------------------
sh-3.00# fdisk /dev/sda1
Command (m for help): p
Disk /dev/sda1: 128 MB, 128450048 bytes
8 heads, 32 sectors/track, 979 cylinders
Units = cylinders of 256 * 512 = 131072 bytes
Device Boot Start End Blocks Id System
/dev/sda1p1 1 979 125296 83 Linux
Command (m for help): q
sh-3.00#
sh-3.00# mkfs.ext3 /dev/sda1
mke2fs 1.38 (30-Jun-2005)
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
31360 inodes, 125436 blocks
6271 blocks (5.00%) reserved for the super user
First data block=1
16 block groups
8192 blocks per group, 8192 fragments per group
1960 inodes per group
Superblock backups stored on blocks:
8193, 24577, 40961, 57345, 73729
Writing inode tables: done
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 29 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
sh-3.00#
sh-3.00#
sh-3.00# fdisk /dev/sda1
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that, of course, the previous
content won't be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
Command (m for help): q
<End of trace>
-----------------
I'm having problem with the mkfs.ext3. It looks like that it corrupts the partition table of my compactFlash disks connected thru the USB. Here's my test sequence:
- connect a 128MB compactFlash thru USB
- execute fdisk to print the partition table => there's a primary partition
- execute mkfs.ext3 to format the disk => seems OK but ...
- execute fdisk to check and verify => partition table corrupted.
I've done this sequence repeatly, and tried with several compactFlash disks. Same result with all the compactFlash disks that i tried. For information, the compactFlash is a ScanDisk 128MB.
See trace below.
Any ideas?
Kind regards,
Shaofeng
<Beginning of trace>
------------------------
sh-3.00# fdisk /dev/sda1
Command (m for help): p
Disk /dev/sda1: 128 MB, 128450048 bytes
8 heads, 32 sectors/track, 979 cylinders
Units = cylinders of 256 * 512 = 131072 bytes
Device Boot Start End Blocks Id System
/dev/sda1p1 1 979 125296 83 Linux
Command (m for help): q
sh-3.00#
sh-3.00# mkfs.ext3 /dev/sda1
mke2fs 1.38 (30-Jun-2005)
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
31360 inodes, 125436 blocks
6271 blocks (5.00%) reserved for the super user
First data block=1
16 block groups
8192 blocks per group, 8192 fragments per group
1960 inodes per group
Superblock backups stored on blocks:
8193, 24577, 40961, 57345, 73729
Writing inode tables: done
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 29 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
sh-3.00#
sh-3.00#
sh-3.00# fdisk /dev/sda1
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that, of course, the previous
content won't be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
Command (m for help): q
<End of trace>
-----------------