macsteve
12-09-2008, 09:22 PM
Problem: Need to boot into Windows Server 2003 machine to read and pull off data on raid array. However, booting off Knoppix CD fails. The knoppix v5.5.1 cd boots fine on a single processor Intel machine, but not on this one.
Here are the ending two lines where the boot attempt quits:
EIP: [<c02bd210>] pci_bus_clock_list+0x0/0x24 SS:ESP 0068:dfea1ea0
<0>Kernel panic - not syncing: att4empted to kill init!
System info:
Tyan Motherboard K8S Pro dual Opteron
AMIBIOS 08.00.10 6/28/04 ID: 0AAAA000
Processor: 2 AMD Opteron 242 @1600 MHz
Ram: 4 GB, 166 MHz
Onboard SCSI is disabled in BIOS
Using Onboard SATA Raid Controller to run 4 disk array holding data
2nd Rocketraid was used to boot 2-drive mirror with W2003 OS.
Is there a way to boot this old machine? If so, do you need any other information?
Here are the ending two lines where the boot attempt quits:
EIP: [<c02bd210>] pci_bus_clock_list+0x0/0x24 SS:ESP 0068:dfea1ea0
<0>Kernel panic - not syncing: att4empted to kill init!
System info:
Tyan Motherboard K8S Pro dual Opteron
AMIBIOS 08.00.10 6/28/04 ID: 0AAAA000
Processor: 2 AMD Opteron 242 @1600 MHz
Ram: 4 GB, 166 MHz
Onboard SCSI is disabled in BIOS
Using Onboard SATA Raid Controller to run 4 disk array holding data
2nd Rocketraid was used to boot 2-drive mirror with W2003 OS.
Is there a way to boot this old machine? If so, do you need any other information?