stickx
09-04-2009, 01:00 AM
Hey guys,
Reaaaallly hope you can help me on this one, I've been banging my head against a wall for 3 days trying to get this laptop to boot into XP again (need to edit boot.ini)
I have a SONY VGN-AR18GP laptop here, and when i boot from the Knoppix CD, there is no hard-drive on the desktop.
From the looks of below there is a raid0 set up... not exactly sure how to access the hdd ><
fdisk -l
root@Microknoppix:/home/knoppix# fdisk -l
Warning: ignoring extra data in partition table 5
Warning: ignoring extra data in partition table 5
Warning: ignoring extra data in partition table 5
Warning: invalid flag 0x717a of partition table 5 will be corrected by w(rite)
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xa456c7aa
Device Boot Start End Blocks Id System
/dev/sda1 1 730 5863693+ 12 Compaq diagnostics
/dev/sda2 * 731 4378 29302560 7 HPFS/NTFS
/dev/sda3 4379 19457 121122067+ f W95 Ext'd (LBA)
/dev/sda5 ? 42807 182551 1122489544+ 2a Unknown
Disk /dev/sdb: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0fd93b00
Disk /dev/sdb doesn't contain a valid partition table
mount -t ntfs-3g /dev/sda1 /media/sda1 -o force
root@Microknoppix:/home/knoppix# mount -t ntfs-3g /dev/sda1 /media/sda1 -o force
Record 0 has no FILE magic (0x47370c0)
Failed to load $MFT: Input/output error
Failed to mount '/dev/sda1': Input/output error
NTFS is either inconsistent, or you have hardware faults, or you have a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows TWICE. The usage of the /f parameter is very
important! If you have SoftRAID/FakeRAID then first you must activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for the details.
dmraid -b
dmraid -r
root@Microknoppix:/home/knoppix# dmraid -b
/dev/sdb: 156301488 total, "56DN4555S"
/dev/sda: 156301488 total, "56DN4557S"
root@Microknoppix:/home/knoppix# dmraid -r
/dev/sdb: isw, "isw_bgfgbgiiae", GROUP, ok, 156301486 sectors, data@ 0
/dev/sda: isw, "isw_bgfgbgiiae", GROUP, ok, 156301486 sectors, data@ 0
[/code]
Reaaaallly hope you can help me on this one, I've been banging my head against a wall for 3 days trying to get this laptop to boot into XP again (need to edit boot.ini)
I have a SONY VGN-AR18GP laptop here, and when i boot from the Knoppix CD, there is no hard-drive on the desktop.
From the looks of below there is a raid0 set up... not exactly sure how to access the hdd ><
fdisk -l
root@Microknoppix:/home/knoppix# fdisk -l
Warning: ignoring extra data in partition table 5
Warning: ignoring extra data in partition table 5
Warning: ignoring extra data in partition table 5
Warning: invalid flag 0x717a of partition table 5 will be corrected by w(rite)
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xa456c7aa
Device Boot Start End Blocks Id System
/dev/sda1 1 730 5863693+ 12 Compaq diagnostics
/dev/sda2 * 731 4378 29302560 7 HPFS/NTFS
/dev/sda3 4379 19457 121122067+ f W95 Ext'd (LBA)
/dev/sda5 ? 42807 182551 1122489544+ 2a Unknown
Disk /dev/sdb: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0fd93b00
Disk /dev/sdb doesn't contain a valid partition table
mount -t ntfs-3g /dev/sda1 /media/sda1 -o force
root@Microknoppix:/home/knoppix# mount -t ntfs-3g /dev/sda1 /media/sda1 -o force
Record 0 has no FILE magic (0x47370c0)
Failed to load $MFT: Input/output error
Failed to mount '/dev/sda1': Input/output error
NTFS is either inconsistent, or you have hardware faults, or you have a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows TWICE. The usage of the /f parameter is very
important! If you have SoftRAID/FakeRAID then first you must activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for the details.
dmraid -b
dmraid -r
root@Microknoppix:/home/knoppix# dmraid -b
/dev/sdb: 156301488 total, "56DN4555S"
/dev/sda: 156301488 total, "56DN4557S"
root@Microknoppix:/home/knoppix# dmraid -r
/dev/sdb: isw, "isw_bgfgbgiiae", GROUP, ok, 156301486 sectors, data@ 0
/dev/sda: isw, "isw_bgfgbgiiae", GROUP, ok, 156301486 sectors, data@ 0
[/code]