32 bit installed not 64 bit

[fenzda]

I got the knoppix latest version. Booted with knoppix64 from DVD. uname shows
that it is using the 64 bit version. Cool. Installed to hard drive, but it installs 32 bit?
I installed it to an SSD drive which makes it very fast, but not all of the memory is
recognized.

Another thing is that version 7 doesn't allow the Browse for smb printers. Version 6
works perfectly and finds my XP host and printer. Everything is good with that.

Wireless detected perfectly in knoppix 7. How do I get rid of the exploding windows
when they close. I cannot find out how to change that. It should be an easy right?

Thanks - you guys are all great. Gals too.

[utu]

How do I get rid of the exploding windows
when they close?
Main Menu>Preferences>CompizConfuguration..>Effects>Animations Add-on[x]
Uncheck this option.

[fenzda]

Thank you so much. Could not find it!!

[fenzda]

I tried to boot with a DVD and knoppix64 fromhd=/dev/sda. It is looking for a usb. sda is the hard drive. How would I
get it to see the hard drive. It also says my SSD is not partitioned. I thought I did that when installed it to the hard drive.
Hmmm. I think if I tried to use gpart I would lose all my data. No big deal, since I can start over if needed.

[Werner P. Schulz]

What happens if you try
knoppix fromhd=/dev/sda1What is the output from
blkidand
fdisk -l

[fenzda]

Thanks Werner!

root@Microknoppix:/home/knoppix# blkid:

/dev/zram0: UUID="3e104d0a-d92e-44bb-b375-02cbb0259263" TYPE="swap"
/dev/sda1: UUID="0d71ae1b-0b47-4a51-b158-c5911839c787" TYPE="swap"
/dev/sda2: UUID="b65f0041-e743-41f4-94a2-6496dfbcae97" TYPE="reiserfs"
/dev/sr0: LABEL="KNOPPIX" TYPE="iso9660"

root@Microknoppix:/home/knoppix# fdisk -l

Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Device Boot Start End Blocks Id System
/dev/sda1 1 2104514 1052257 82 Linux swap / Solaris
/dev/sda2 * 2104515 234436544 116166015 83 Linux

knoppix fromhd=/dev/sda2 looks for usb??

If I put knoppix64 on a usb it works. Not so much a hard drive.

[The Lightning Stalker]

Go to /boot and copy vmlinuz-3.6.11-64 into vmlinuz and it will default to the 64 bit kernel on boot.

[Werner P. Schulz]

knoppix fromhd=/dev/sda2 looks for usb??
No, it looks for a Poor man's install (http://knoppix.net/wiki/Category:Hard_drive_Installation#Poor_man.27s_inst all) - no matter whether this install is on an internal harddrive, external USB drive or USB stick. You only have to know the right partition name and number at boot time.

[fenzda]

Thanks so much Werner. Works. So easy!

root@Microknoppix:/home/knoppix# uname -r
3.4.9-64