TheCyberDude
06-23-2003, 04:12 PM
NOTE: With this build you have to use orginal .config file in /usr/source/linux/linux-2.4.20-xfs .
ALSO: ONLY use this if you have an fresh HDD install of Knoppix or NO programs compiled!!!!!! If Modem is your only compiled program, no problem. But you will have to re-install it to get it to work.
Download:
http://developer.linuxtag.net/knoppix/i386/kernel-source-2.4.20-xfs_10.00.Custom_all.deb
Go into konsole and su <password> and chmod a+rw /home -R .
(Its read-only)
chmod a+rw /usr/src -R
Launch Kpackage and Install.
su <password>
cd /usr/src
bunzip2 kernel-source-2.4.20-xfs.tar.bz2
tar -xvf kernel-source-2.4.20-xfs.tar
cp /usr/src/linux-2.4.20-xfs/include/asm-i386/system.h /usr/src/kernel-source-2.4.20-xfs/include/asm-i386
overwrite? Y
rm linux
ln -s kernel-source-2.4.20-xfs linux
cd linux
make clean
make mrproper
make xconfig
(Don't make any selections!)
BUTTON: Load configuration File
/usr/src/linux-2.4.20-xfs/.config (Can use CNTRL V) to patse in
BUTTON: Save and Exit
make dep
make bzImage
make modules (Take an Break)
cp /usr/src/linux/arch/i386/boot/bzImage /boot/vmlinuz-test
cp /usr/src/linux/System.map /boot/System.map-test
mv /lib/modules/2.4.20-xfs /lib/modules/2.4.20-xfs.old
make modules_install
kwrite %U
Open /etc/lilo.config
We want to add another description like your regular boot for Knoppix.
EXAMPLE:
image=/boot/vmlinuz-2.4.20-xfs <--- This is my Boot-Up for Knoppix
label=Knoppix
root=/dev/hdg6 <--- Yours will be different!
read-only
initrd=/boot/initrd.gz
image=/boot/vmlinuz-test <--- I added these 5 lines.
label=Knoppix-test
root=/dev/hdg6 <--- Insert Yours from Above!!!
read-only
initrd=/boot/initrd.gz
Now we have 2 Boot Promps: Knoppix and Knoppix-test, you may also have one for Windows.
SAVE lilo.conf
From Konsole,
lilo
Screen will return with:
Added Knoppix
Knoppix-test
and any other Boot prompts in lilo.conf
That's - RE-BOOT and load Knoppix-test and go to Launch Control Center and go to System Adminstration - Linux Kernel and you can
see whats enabled in your Kernel.
IMPORTANT: DO THIS!!! (Now or Later) Will EXPLAIN BELOW!!!!
image=/boot/vmlinuz-2.4.20-xfs <--- This is my Boot-Up for Knoppix
label=Knoppix <--- Rename this Fail-Safe <---
root=/dev/hdg6 <--- Yours will be different!
read-only
initrd=/boot/initrd.gz
image=/boot/vmlinuz-test <--- I added these 5 lines.
label=Knoppix-test <--- Rename this Knoppix <---
root=/dev/hdg6 <--- Insert Yours from Above!!!
read-only
initrd=/boot/initrd.gz
Move the new Knoppix above Fail-Safe, and Your Boot Screen will
look like this:
Knoppix
Fail-Safe
Windows <--- If you have an Windows Entry.
THE REASON !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!
Since we moved /lib/modules/2.4.20-xfs to 2.4.20-xfs.old ,
we want to rename Knoppix-test to Knoppix (It's using these librays!)
For you Expert's: Maybe you can clue me in, if I try:
(NO-ONE DO THE FOLLOWING!)
mv vmlinuz-2.4.20-xfs vmlinuz-2.4.20-xfs.old
mv vmlinuz-test vmlinuz-2.4.20-xfs
mv System.map System.map.old
mv System.map-test System.map
Both Knoppix's boot OK, But the Orginal Knoppix 2.4.20-xfs,
go to /etc/init.d/bootmisc.sh - It won't open OR will any others. In
Knoppix-test They Will! I expect it has something to do with
mv /lib/modules/2.4.20-xfs /lib/modules/2.4.20-xfs.old .
That's why I had everbody rename:
image=/boot/vmlinuz-test <---
label=Knoppix-test <--- Rename this Knoppix
and put at top of lilo.conf .
ALSO: ONLY use this if you have an fresh HDD install of Knoppix or NO programs compiled!!!!!! If Modem is your only compiled program, no problem. But you will have to re-install it to get it to work.
Download:
http://developer.linuxtag.net/knoppix/i386/kernel-source-2.4.20-xfs_10.00.Custom_all.deb
Go into konsole and su <password> and chmod a+rw /home -R .
(Its read-only)
chmod a+rw /usr/src -R
Launch Kpackage and Install.
su <password>
cd /usr/src
bunzip2 kernel-source-2.4.20-xfs.tar.bz2
tar -xvf kernel-source-2.4.20-xfs.tar
cp /usr/src/linux-2.4.20-xfs/include/asm-i386/system.h /usr/src/kernel-source-2.4.20-xfs/include/asm-i386
overwrite? Y
rm linux
ln -s kernel-source-2.4.20-xfs linux
cd linux
make clean
make mrproper
make xconfig
(Don't make any selections!)
BUTTON: Load configuration File
/usr/src/linux-2.4.20-xfs/.config (Can use CNTRL V) to patse in
BUTTON: Save and Exit
make dep
make bzImage
make modules (Take an Break)
cp /usr/src/linux/arch/i386/boot/bzImage /boot/vmlinuz-test
cp /usr/src/linux/System.map /boot/System.map-test
mv /lib/modules/2.4.20-xfs /lib/modules/2.4.20-xfs.old
make modules_install
kwrite %U
Open /etc/lilo.config
We want to add another description like your regular boot for Knoppix.
EXAMPLE:
image=/boot/vmlinuz-2.4.20-xfs <--- This is my Boot-Up for Knoppix
label=Knoppix
root=/dev/hdg6 <--- Yours will be different!
read-only
initrd=/boot/initrd.gz
image=/boot/vmlinuz-test <--- I added these 5 lines.
label=Knoppix-test
root=/dev/hdg6 <--- Insert Yours from Above!!!
read-only
initrd=/boot/initrd.gz
Now we have 2 Boot Promps: Knoppix and Knoppix-test, you may also have one for Windows.
SAVE lilo.conf
From Konsole,
lilo
Screen will return with:
Added Knoppix
Knoppix-test
and any other Boot prompts in lilo.conf
That's - RE-BOOT and load Knoppix-test and go to Launch Control Center and go to System Adminstration - Linux Kernel and you can
see whats enabled in your Kernel.
IMPORTANT: DO THIS!!! (Now or Later) Will EXPLAIN BELOW!!!!
image=/boot/vmlinuz-2.4.20-xfs <--- This is my Boot-Up for Knoppix
label=Knoppix <--- Rename this Fail-Safe <---
root=/dev/hdg6 <--- Yours will be different!
read-only
initrd=/boot/initrd.gz
image=/boot/vmlinuz-test <--- I added these 5 lines.
label=Knoppix-test <--- Rename this Knoppix <---
root=/dev/hdg6 <--- Insert Yours from Above!!!
read-only
initrd=/boot/initrd.gz
Move the new Knoppix above Fail-Safe, and Your Boot Screen will
look like this:
Knoppix
Fail-Safe
Windows <--- If you have an Windows Entry.
THE REASON !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!
Since we moved /lib/modules/2.4.20-xfs to 2.4.20-xfs.old ,
we want to rename Knoppix-test to Knoppix (It's using these librays!)
For you Expert's: Maybe you can clue me in, if I try:
(NO-ONE DO THE FOLLOWING!)
mv vmlinuz-2.4.20-xfs vmlinuz-2.4.20-xfs.old
mv vmlinuz-test vmlinuz-2.4.20-xfs
mv System.map System.map.old
mv System.map-test System.map
Both Knoppix's boot OK, But the Orginal Knoppix 2.4.20-xfs,
go to /etc/init.d/bootmisc.sh - It won't open OR will any others. In
Knoppix-test They Will! I expect it has something to do with
mv /lib/modules/2.4.20-xfs /lib/modules/2.4.20-xfs.old .
That's why I had everbody rename:
image=/boot/vmlinuz-test <---
label=Knoppix-test <--- Rename this Knoppix
and put at top of lilo.conf .