how to change refresh rate ?

[Rivendell]

Hi everyone

I have a monitor nec FE700+, it can do 85hz at 1024x768. and a knoppix clone called Damn Small Linux.
Can anyone tell me which file or files are responsible for refresh rate.
my system use 60 hz. I tried to use xf86config, and edit /etc/X11/XF86Config, but it doesn't work. are there any other files in which screen refresh rate can be changed

note: there is no Xf86Config-4
I'm looking forward to any suggestions from you.
Thanking you in anticipation Rivendell

[rickenbacherus]

Could you post your original XF86Config file? What are the specifications for your monitor? Vertical and Horizontal refresh rates? You should be able to get that either from the manual or at the manufacturers website.

[Rivendell]

This is a part of my XF86Config I removed from it font and keyboard section.
I think that this problem is caused by autoconfiguration program which doesn't recognize my video card ( Nvidia Riva 128). I installed drivers but i don't exactly know where in XF86Config write which driver to use.


# Auto-generated by mkxf86config

Section "Monitor"
Identifier "Monitor0"
VendorName "NEC"
ModelName "NEC61ba"
HorizSync 31 - 70 # DDC-probed
VertRefresh 55 - 120 # DDC-probed
# These are the DDC-probed settings reported by your monitor.
# 1152x864, 75.0Hz; hfreq=67.50, vfreq=75.00
ModeLine "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
# 1024x768, 85.0Hz; hfreq=68.68, vfreq=85.00
ModeLine "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
# 1024x768, 75.0Hz; hfreq=60.02, vfreq=75.03
ModeLine "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768, 70.0Hz; hfreq=56.48, vfreq=70.07
ModeLine "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 800x600, 85.0Hz; hfreq=53.67, vfreq=85.06
ModeLine "800x600" 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync
# 800x600, 75.0Hz; hfreq=46.88, vfreq=75.00
ModeLine "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600, 60.0Hz; hfreq=37.88, vfreq=60.32
ModeLine "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
# 640x480, 85.0Hz; hfreq=43.27, vfreq=85.01
ModeLine "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
# 640x480, 75.0Hz; hfreq=37.50, vfreq=75.00
ModeLine "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
# 640x480, 72.0Hz; hfreq=37.86, vfreq=72.81
ModeLine "640x480" 31.50 640 656 696 816 480 481 484 504 -hsync -vsync
# 640x480, 60.0Hz; hfreq=31.47, vfreq=59.94
ModeLine "640x480" 25.17 640 648 744 784 480 482 484 509 -hsync -vsync
EndSection

Section "Device"
Identifier "My Video Card"
VendorName "Unknown"
BoardName "Unknown"
# TextClockFreq 22.175
EndSection

Section "Device"
Identifier "fbdev"
VendorName "Unknown"
BoardName "Unknown"

[Rivendell]

Sorry I've forgot about this:


# Standard Server
Section "Screen"
Driver "svga"
Device "My Video Card"
Monitor "Monitor0"
Subsection "Display"
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection

# Accel. Server(s)
Section "Screen"
Driver "accel"
Device "My Video Card"
Monitor "Monitor0"
Subsection "Display"
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection

# Fallback
Section "Screen"
Driver "vga16"
Device "My Video Card"
Monitor "Monitor0"
Subsection "Display"
Modes "1024x768" "800x600" "640x480"
EndSubsection
EndSection

[rickenbacherus]

This is a part of my XF86Config I removed from it font and keyboard section.
I think that this problem is caused by autoconfiguration program which doesn't recognize my video card ( Nvidia Riva 128). I installed drivers but i don't exactly know where in XF86Config write which driver to use.



Usually it would be something like this:



# Standard Server
Section "Screen"
Driver "nv"
Device "My Video Card"
Monitor "Monitor0"
Subsection "Display"
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection

What is it exactly that's wrong w/ your resolution?