View Full Version : help knoppix....
Eraser
01-22-2003, 04:48 PM
Hi all :D
I'm new on this forum! Compliments for Knoppix! I found it fantastic!! :D
I've a little problem. I've a very old monitor that support only 800x600 or previous resolution.
I've solved this matter typing in the boot "fb800x600" and knoppix run very well. But now I would install it on hd. I followed the procedure to install to hd and it ends without problems.
But when I run Knoppix with floppy boot, it run at 1024x768 resolution and my monitor doesn't support it :(
How can I change the resolution to 800x600?
Very thanks
Bye
Eraser 8)
PS: Sorry for my bad english, but I'm italian :lol:
hamatoma
01-22-2003, 09:40 PM
Boot from CD
Enter command console. Insert floppy (named data) into floppy drive. (Warning: All data on your floppy will be destroyed!)
sudo -s
cd /etc/X11
tar cf /dev/fd0 XF86Config-4
Boot from boot-floppy. When LiLo stops, insert
knoppix 2
Now you come to the init level 2 and no X-server will be started.
Enter password.
cd /etc/X11
# make backup file:
cp XF86Config-4 XF86Config-4.1024
# Restore XF86Config-4 from floppy
tar xf /dev/fd0
# start init level 5 with X-server:
init 5
I hope, this helps.
Hamatoma
hamatoma
01-22-2003, 09:46 PM
Sorry: After booting you must exchange the floppies. Before you use the tar-command!
Greetings from Munich to the sunny Italy (I hope so).
Hamatoma
Eraser
01-23-2003, 02:16 PM
Hi hamatoma and very thanks for the reply :D
I didn't resolve the problem :(
I followed your procedure but the screen boot always in 1024x768 :(
If I've understood right, X-server isn't the matter. The problem begin when Boot from floppy finish and begin the procedure to detect hardware and other things, so before kde start :shock: :cry: :cry:
What could I do?
Kind regards
Eraser :)
SUOrangeman
01-23-2003, 02:54 PM
I'm not in Knoppix right now, but are there different resolutions preconfigured in the /etc/X11/XF86Config-4? To find out, press CTRL&ATL&- (minus on the numberic keypad). CTRL&ALT&+ (plus) *should* jump to the next highest resolution configured in XF86Config-4.
To make the changes permanent, delete instances of "1024x768" in XF86Config-4 (and anything higher, for that matter).
-SUO
Eraser
01-23-2003, 05:52 PM
thanks for the reply :D
I tried to press CTRL&ALT&- or + (I knew this cheat) but it doesn't work :(
I'm desperate :cry:
Bye
Eraser :cry:
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.