PDA

View Full Version : Problems detecting partitions on Promise IDE Ultra 133



Soulfly
09-26-2003, 06:26 PM
Knoppix have severe problems detecting my partitions while my HD linux install has no problems with this (both 2.4 and 2.6-test5). He seems to be looking for raid while I dont have raid on any of my discs. Disc layout is shown in the dmesg from my HD install:

hde: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=65535/16/63, UDMA(100)
hde: hde1 hde2 < hde5 hde6 >
hdf: max request size: 1024KiB
hdf: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hdf: hdf1 hdf2 < hdf5 >

here's the failing Knoppix dmesg output to and including the promise driver (SCSI, Net, etc works fine):

0x31 pin1=2 pin2=0
number of MP IRQ sources: 19.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00170011
....... : max redirection entries: 0017
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 000 00 1 0 0 0 0 0 0 00
06 001 01 0 0 0 0 0 1 1 51
07 001 01 0 0 0 0 0 1 1 59
08 001 01 0 0 0 0 0 1 1 61
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 001 01 0 0 0 0 0 1 1 69
0d 001 01 0 0 0 0 0 1 1 71
0e 001 01 0 0 0 0 0 1 1 79
0f 001 01 0 0 0 0 0 1 1 81
10 001 01 1 1 0 1 0 1 1 89
11 000 00 1 0 0 0 0 0 0 00
12 001 01 1 1 0 1 0 1 1 91
13 001 01 1 1 0 1 0 1 1 99
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ18 -> 0:18
IRQ19 -> 0:19
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 451.0284 MHz.
..... host bus clock speed is 100.2283 MHz.
cpu: 0, clocks: 1002283, slice: 501141
CPU0<T0:1002272,T1:501120,D:11,S:501141,C:1002283>
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xfdb71, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI->APIC IRQ transform: (B0,I7,P3) -> 19
PCI->APIC IRQ transform: (B0,I18,P0) -> 18
PCI->APIC IRQ transform: (B0,I20,P0) -> 16
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
PCI->APIC IRQ transform: (B2,I4,P0) -> 19
PCI->APIC IRQ transform: (B2,I5,P0) -> 16
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
vesafb: framebuffer at 0xe8000000, mapped to 0xe880d000, size 3072k
vesafb: mode is 1024x768x16, linelength=2048, pages=0
vesafb: protected mode interface info at c000:0a15
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
keyboard: Timeout - AT keyboard not present?(ed)
keyboard: Timeout - AT keyboard not present?(f4)
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
PDC20269: IDE controller at PCI slot 00:12.0
PDC20269: chipset revision 2
PDC20269: not 100% native mode: will probe irqs later
PDC20269: ROM enabled at 0xfebf8000
ide2: BM-DMA at 0xef90-0xef97, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xef98-0xef9f, BIOS settings: hdg:pio, hdh:pio
hde: IC35L040AVER07-0, ATA DISK drive
hdf: WDC WD1200JB-00DUA0, ATA DISK drive
hdf: set_drive_speed_status: status=0xff { Busy }
ide2 at 0xefe0-0xefe7,0xefae on irq 18
hde: attached ide-disk driver.
hde: status timeout: status=0xff { Busy }

hde: drive not ready for command
hde: host protected area => 1
hde: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=79780/16/63
hdf: attached ide-disk driver.
hdf: status timeout: status=0xff { Busy }

hdf: drive not ready for command
hdf: host protected area => 1
hdf: status timeout: status=0xff { Busy }

hdf: drive not ready for command
hdf: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=14593/255/63
hdf: status timeout: status=0xff { Busy }

hdf: drive not ready for command
Partition check:
hde:hde: status timeout: status=0xff { Busy }

PDC202XX: Primary channel reset.
hde: drive not ready for command
ide2: reset timed-out, status=0xff
hde: status timeout: status=0xff { Busy }

PDC202XX: Primary channel reset.
hde: drive not ready for command
ide2: reset timed-out, status=0xff
end_request: I/O error, dev 21:00 (hde), sector 0
end_request: I/O error, dev 21:00 (hde), sector 2
end_request: I/O error, dev 21:00 (hde), sector 4
end_request: I/O error, dev 21:00 (hde), sector 6
end_request: I/O error, dev 21:00 (hde), sector 0
end_request: I/O error, dev 21:00 (hde), sector 2
end_request: I/O error, dev 21:00 (hde), sector 4
end_request: I/O error, dev 21:00 (hde), sector 6
ldm_validate_partition_table(): Disk read failed.
end_request: I/O error, dev 21:00 (hde), sector 0
end_request: I/O error, dev 21:00 (hde), sector 2
end_request: I/O error, dev 21:00 (hde), sector 4
end_request: I/O error, dev 21:00 (hde), sector 6
unable to read partition table
hdf:hdf: status timeout: status=0xff { Busy }

PDC202XX: Primary channel reset.
hdf: drive not ready for command
ide2: reset timed-out, status=0xff
hdf: status timeout: status=0xff { Busy }

PDC202XX: Primary channel reset.
hdf: drive not ready for command
ide2: reset timed-out, status=0xff
end_request: I/O error, dev 21:40 (hdf), sector 0
end_request: I/O error, dev 21:40 (hdf), sector 2
end_request: I/O error, dev 21:40 (hdf), sector 4
end_request: I/O error, dev 21:40 (hdf), sector 6
end_request: I/O error, dev 21:40 (hdf), sector 0
end_request: I/O error, dev 21:40 (hdf), sector 2
end_request: I/O error, dev 21:40 (hdf), sector 4
end_request: I/O error, dev 21:40 (hdf), sector 6
ldm_validate_partition_table(): Disk read failed.
end_request: I/O error, dev 21:40 (hdf), sector 0
end_request: I/O error, dev 21:40 (hdf), sector 2
end_request: I/O error, dev 21:40 (hdf), sector 4
end_request: I/O error, dev 21:40 (hdf), sector 6
unable to read partition table
ide: late registration of driver.
end_request: I/O error, dev 21:00 (hde), sector 80418176
pdcraid: Error reading superblock.
end_request: I/O error, dev 21:40 (hdf), sector 234436480
pdcraid: Error reading superblock.
end_request: I/O error, dev 21:00 (hde), sector 80418176
pdcraid: Error reading superblock.
end_request: I/O error, dev 21:40 (hdf), sector 234436480
pdcraid: Error reading superblock.
Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
Highpoint HPT370 Softwareraid driver for linux version 0.02
end_request: I/O error, dev 21:00 (hde), sector 8
hptraid: Error reading superblock.
end_request: I/O error, dev 21:40 (hdf), sector 8
hptraid: Error reading superblock.
end_request: I/O error, dev 21:00 (hde), sector 8
hptraid: Error reading superblock.
end_request: I/O error, dev 21:40 (hdf), sector 8
hptraid: Error reading superblock.
end_request: I/O error, dev 21:00 (hde), sector 8
hptraid: Error reading superblock.
end_request: I/O error, dev 21:40 (hdf), sector 8
hptraid: Error reading superblock.
end_request: I/O error, dev 21:00 (hde), sector 8
hptraid: Error reading superblock.
end_request: I/O error, dev 21:40 (hdf), sector 8
hptraid: Error reading superblock.
Guestimating sector 80417215 for superblock
end_request: I/O error, dev 21:00 (hde), sector 80417208
silraid: Error reading superblock.
Guestimating sector 234420224 for superblock
end_request: I/O error, dev 21:40 (hdf), sector 234420224
silraid: Error reading superblock.
driver for Silicon Image(tm) Medley(tm) hardware version 0.0.1: No raid array found

Soulfly
09-26-2003, 06:28 PM
here's dmesg on my HD Debian linux install:

Linux version 2.6.0-test5-mm4 (root@salsa) (gcc version 3.3.2 20030908 (Debian prerelease)) #2 Wed Sep 24 23:20:11
CEST 2003
Video mode to be used for restore is 31a
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000027fe0000 (usable)
BIOS-e820: 0000000027fe0000 - 0000000027ff8000 (ACPI data)
BIOS-e820: 0000000027ff8000 - 0000000028000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
639MB LOWMEM available.
found SMP MP-table at 000fb560
hm, page 000fb000 reserved twice.
hm, page 000fc000 reserved twice.
hm, page 000f6000 reserved twice.
hm, page 000f7000 reserved twice.
On node 0 totalpages: 163808
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 159712 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.1 present.
ACPI disabled because your bios is from 99 and too old
You can enable it with acpi=force
ACPI: RSDP (v000 AMI ) @ 0x000fb350
ACPI: RSDT (v001 OEMTYN OEMTYNTB 0x00000009 AMI 0x00000001) @ 0x27ff0000
ACPI: FADT (v001 OEMTYN OEMTYNTB 0x00000009 AMI 0x00000001) @ 0x27ff1000
ACPI: MADT (v001 OEMTYN OEMTYNTB 0x00000009 AMI 0x00000001) @ 0x27ff2000
ACPI: DSDT (v001 OEMTYN OEMTYNTB 0x00000012 MSFT 0x01000007) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:5 APIC version 17
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.1
Virtual Wire compatibility mode.
OEM ID: INTEL Product ID: 440GX APIC at: 0xFEE00000
I/O APIC #2 Version 17 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 1
Building zonelist for node : 0
Kernel command line: BOOT_IMAGE=linux ro root=805
current: c03fa9c0
current->thread_info: c0486000
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 451.018 MHz processor.
Console: colour dummy device 80x25
Memory: 643948k/655232k available (2617k kernel code, 10548k reserved, 987k data, 176k init, 0k highmem)
zapping low mappings.
Calibrating delay loop... 890.88 BogoMIPS
Security Scaffold v1.0.0 initialized
Capability LSM initialized
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0183fbff 00000000 00000000 00000000
CPU: After vendor identify, caps: 0183fbff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0183fbff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium II (Deschutes) stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000004
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-5, 2-9, 2-10, 2-11, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 20.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00170011
....... : max redirection entries: 0017
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 000 00 1 0 0 0 0 0 0 00
06 001 01 0 0 0 0 0 1 1 51
07 001 01 0 0 0 0 0 1 1 59
08 001 01 0 0 0 0 0 1 1 61
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 001 01 0 0 0 0 0 1 1 69
0d 001 01 0 0 0 0 0 1 1 71
0e 001 01 0 0 0 0 0 1 1 79
0f 001 01 0 0 0 0 0 1 1 81
10 001 01 1 1 0 1 0 1 1 89
11 001 01 1 1 0 1 0 1 1 91
12 001 01 1 1 0 1 0 1 1 99
13 001 01 1 1 0 1 0 1 1 A1
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 450.0946 MHz.
..... host bus clock speed is 100.0210 MHz.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfdb71, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20030916
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f73a0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x6a44, dseg 0xf0000
PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
SCSI subsystem initialized
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI->APIC IRQ transform: (B0,I7,P3) -> 19
PCI->APIC IRQ transform: (B0,I17,P0) -> 17
PCI->APIC IRQ transform: (B0,I18,P0) -> 18
PCI->APIC IRQ transform: (B0,I20,P0) -> 16
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
PCI->APIC IRQ transform: (B2,I4,P0) -> 19
PCI->APIC IRQ transform: (B2,I5,P0) -> 16
vesafb: framebuffer at 0xe8000000, mapped to 0xe8800000, size 16384k
vesafb: mode is 1280x1024x16, linelength=2560, pages=0
vesafb: protected mode interface info at c000:0a15
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
Machine check exception polling timer started.
Initializing Cryptographic API
Limiting direct PCI/PCI transfers.
Console: switching to colour frame buffer device 160x64
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: Maximum main memory to use for agp memory: 564M
agpgart: AGP aperture is 64M @ 0xf8000000
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:00:11.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xec00. Vers LK1.1.19
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PDC20269: IDE controller at PCI slot 0000:00:12.0
PDC20269: chipset revision 2
PDC20269: ROM enabled at 0xfebf8000
PDC20269: 100% native mode on irq 18
ide2: BM-DMA at 0xef90-0xef97, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xef98-0xef9f, BIOS settings: hdg:pio, hdh:pio
hde: IC35L040AVER07-0, ATA DISK drive
hdf: WDC WD1200JB-00DUA0, ATA DISK drive
Using anticipatory io scheduler
ide2 at 0xefe0-0xefe7,0xefae on irq 18
hde: max request size: 128KiB
hde: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=65535/16/63, UDMA(100)
hde: hde1 hde2 < hde5 hde6 >
hdf: max request size: 1024KiB
hdf: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hdf: hdf1 hdf2 < hdf5 >

Soulfly
09-26-2003, 06:30 PM
here's my lspci -v:
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 02)
Flags: bus master, medium devsel, latency 64
Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0

00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fc900000-fe9fffff
Prefetchable memory behind bridge: e4600000-f46fffff

00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
Flags: bus master, medium devsel, latency 0

00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master])
Flags: bus master, medium devsel, latency 64
I/O ports at ffa0 [size=16]

00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
Flags: bus master, medium devsel, latency 64, IRQ 19
I/O ports at ef40 [size=32]

00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
Flags: medium devsel, IRQ 9

00:11.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 24)
Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100
Flags: bus master, medium devsel, latency 64, IRQ 17
I/O ports at ec00 [size=128]
Memory at febf7f80 (32-bit, non-prefetchable) [size=128]
Expansion ROM at febc0000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 1

00:12.0 Unknown mass storage controller: Promise Technology, Inc. 20269 (rev 02) (prog-if 85)
Subsystem: Promise Technology, Inc.: Unknown device 4d68
Flags: bus master, 66Mhz, slow devsel, latency 64, IRQ 18
I/O ports at efe0 [size=8]
I/O ports at efac [size=4]
I/O ports at efa0 [size=8]
I/O ports at efa8 [size=4]
I/O ports at ef90 [size=16]
Memory at febfc000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at febf8000 [disabled] [size=16K]
Capabilities: [60] Power Management version 1

00:13.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, medium devsel, latency 64
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000f4700000-00000000f4700000

00:14.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 08)
Subsystem: Creative Labs CT4832 SBLive! Value
Flags: bus master, medium devsel, latency 64, IRQ 16
I/O ports at ef20 [size=32]
Capabilities: [dc] Power Management version 1

00:14.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 08)
Subsystem: Creative Labs Gameport Joystick
Flags: bus master, medium devsel, latency 64
I/O ports at eff0 [size=8]
Capabilities: [dc] Power Management version 1

01:00.0 VGA compatible controller: nVidia Corporation NV15 [GeForce2 GTS/Pro] (rev a3) (prog-if 00 [VGA])
Subsystem: Asustek Computer, Inc. V7700 AGP Video Card
Flags: bus master, 66Mhz, medium devsel, latency 248, IRQ 16
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Memory at e8000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at fe9f0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Capabilities: [44] AGP version 2.0

02:04.0 SCSI storage controller: Adaptec AHA-3940U/UW/UWD / AIC-7882U
Flags: bus master, medium devsel, latency 64, IRQ 19
I/O ports at d800 [disabled] [size=256]
Memory at feaff000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at feae0000 [disabled] [size=64K]

02:05.0 SCSI storage controller: Adaptec AHA-3940U/UW/UWD / AIC-7882U
Flags: bus master, medium devsel, latency 64, IRQ 16
I/O ports at d400 [disabled] [size=256]
Memory at feafe000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at fead0000 [disabled] [size=64K]