alex+
12-19-2003, 04:20 AM
KNOPPIX 3.3-2003-11-19 downloaded OK and its MD5 checked OK
I had installed 3.2 on hard drive earlier and it works perfectly so I used
the same installation instructions with 3.3. The installation ran perfectly.
3.3's boot seems normal until it suddenly stops with this message on the monitor:
Cleaning: /tmp /vat/lock /var/run 4095Mb
blk: queue c0334b60,I/O limit (mask 0xffffffff)
blk: queue c0334ca8, I/O limit (mask 0xffffffff)
hda: dma_intr: status=0x51 {DriveReady SeekCompleteError}
hda: dma_intr: error=0x84 {DriveStatusError Bad CRC}
hda: dma_intr: status=0x51 {DriveReady SeekCompleteError}
hda: dma_intr: error=0x84 {DriveStatusError Bad CRC}
hda: dma_intr: status=0x51 {DriveReady SeekCompleteError}
hda: dma_intr: error=0x84 {DriveStatusError Bad CRC}
hda: dma_intr: status=0x51 {DriveReady SeekCompleteError}
hda: dma_intr: error=0x84 {DriveStatusError Bad CRC}
The keyboard has no effect----the system is locked (with a blinking
cursor). I have to do a pushbutton restart..
Any clues?
I had installed 3.2 on hard drive earlier and it works perfectly so I used
the same installation instructions with 3.3. The installation ran perfectly.
3.3's boot seems normal until it suddenly stops with this message on the monitor:
Cleaning: /tmp /vat/lock /var/run 4095Mb
blk: queue c0334b60,I/O limit (mask 0xffffffff)
blk: queue c0334ca8, I/O limit (mask 0xffffffff)
hda: dma_intr: status=0x51 {DriveReady SeekCompleteError}
hda: dma_intr: error=0x84 {DriveStatusError Bad CRC}
hda: dma_intr: status=0x51 {DriveReady SeekCompleteError}
hda: dma_intr: error=0x84 {DriveStatusError Bad CRC}
hda: dma_intr: status=0x51 {DriveReady SeekCompleteError}
hda: dma_intr: error=0x84 {DriveStatusError Bad CRC}
hda: dma_intr: status=0x51 {DriveReady SeekCompleteError}
hda: dma_intr: error=0x84 {DriveStatusError Bad CRC}
The keyboard has no effect----the system is locked (with a blinking
cursor). I have to do a pushbutton restart..
Any clues?