Kriil
02-26-2004, 11:35 PM
I'm running Knoppix from a CD on my laptop. I have an HP pavillion ze4300 (mobile AMD Athlon 910Mhz, 192MB RAM, HD is NTFS format). The system booted perfectly the first time I booted it from the CD, but I can't figure out how to get my wireless card working. My laptop has a built-in ethernet card and I also have a Linksys wireless ethernet card, which I use to connect to internet. I have a linksys wireless router linked to a cable modem.
Here is part of my lspci -v output (i don't have a floppy or other external media, so i had to write this down. I've only included the two ethernet controllers)
-------------------------------------
00:12.0 Ethernet controller: National Semiconductor Corporation DP83812 (MacPhyter) Ethernet controller
Subsystem: Hewlett-Packard Company: Uknown device 0024
Flags: bus master, medium devsel, latency 90, IRQ 11
I/O ports at 8c00 [size=256]
Memory at d0004000 (32-bit, nonprefetchable) [size=4k]
Expansion ROM at <unassigned>[disabled][size=64k]
Capabiities: <available only to root>
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.: Uknown device 8180 (rev 20)
Subsystem: Linksys: unknown device 0019
Flags: medium devsel, IRQ 5
I/O ports at 4000 [size=256]
Memory at 10000000 (32-bit, non-prefetchable) [size=512]
Capabilities: <available only to root>
I ran netcardconfig from the shell with the following output:
Sending DHCP broadcast from device eth0operation failed
Failed.
Hit return to exit.
I ran iwconfig as well:
lo no wireles extensions
eth0 no wireless extensions
------------------------------------------------------------
This is the first time I've used Linux so if anyone could help I would appreciate it, and if you need more info I'll happily provide it if you tell me how. Thank you!
Kriil
Here is part of my lspci -v output (i don't have a floppy or other external media, so i had to write this down. I've only included the two ethernet controllers)
-------------------------------------
00:12.0 Ethernet controller: National Semiconductor Corporation DP83812 (MacPhyter) Ethernet controller
Subsystem: Hewlett-Packard Company: Uknown device 0024
Flags: bus master, medium devsel, latency 90, IRQ 11
I/O ports at 8c00 [size=256]
Memory at d0004000 (32-bit, nonprefetchable) [size=4k]
Expansion ROM at <unassigned>[disabled][size=64k]
Capabiities: <available only to root>
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.: Uknown device 8180 (rev 20)
Subsystem: Linksys: unknown device 0019
Flags: medium devsel, IRQ 5
I/O ports at 4000 [size=256]
Memory at 10000000 (32-bit, non-prefetchable) [size=512]
Capabilities: <available only to root>
I ran netcardconfig from the shell with the following output:
Sending DHCP broadcast from device eth0operation failed
Failed.
Hit return to exit.
I ran iwconfig as well:
lo no wireles extensions
eth0 no wireless extensions
------------------------------------------------------------
This is the first time I've used Linux so if anyone could help I would appreciate it, and if you need more info I'll happily provide it if you tell me how. Thank you!
Kriil