rickenbacherus, you seem very knowledgable, please help
I have the exact same problem with my SOYO Cigar Thumb drive, it's a 64MB piece. My system picks up the drive but I don't think it loads the driver for it. If I cat /proc/bus/usb/drivers/0.. or /1.., it shows that the drive is indeed detected.. but system does not translate from there to a "sda" or "sdb" device. How do I go about manually mounting or translating from there to a "sda" or "sdb" device?
I have tried 'echo "add single-device 0 0 1 0" > /proc/scsi/scsi' to no avail. Please advise on correct usage. Normally if driver is loaded for a device, specifically an emulated device, you can 'cat /proc/scsi/scsi' and it would list all devices loaded, including any cd-rom drives.
Please help. I've been stuck on this for over half a year and no one is able to assist. I lost hope. I now find you and I believe you can shed some light into this.
Thanks in advance.
Listing of 'cat /proc/bus/usb/devices'
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=a000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=a400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16 #Cfgs= 1
P: Vendor=0aec ProdID=5010 Rev= 1.00
S: Manufacturer=
S: Product= USB Storage Device
S: SerialNumber=0AEC301000001A00
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms