I have a dual display system that works great in Windows. But with Knoppix 3.3, both monitors appear identical. I cannot move a window from one monitor to the other monitor. What do I need to do to allow Knoppix to recognize my dual monitor system?
Printable View
I have a dual display system that works great in Windows. But with Knoppix 3.3, both monitors appear identical. I cannot move a window from one monitor to the other monitor. What do I need to do to allow Knoppix to recognize my dual monitor system?
I have the same problem.... is there software out there than can do this?
knoppix 3.4 supports it is it possible for you to upgrade?
I ordered a new Knoppix CD Monday and expect it to arrive today or tomorrow. So hopefully that will solve the problem!
I have a multiple monitor setup in Windows.. but knoppix 3.4 says that my setup does not support this.Quote:
Originally Posted by Phatmonkey
A little more information than what you have there will be required to help you get it done such as video card(s) make/model, amount of ram on it and the type of monitors you have their refresh rates both vertical and horizontal desired resolution of both the monitors and whether you want to use xinerama to have one large desktop or want to clone the display to both monitors. Oh and are you using the CD or a HD install if HD install which method??Quote:
Originally Posted by rmchale
The general procedure is boot then you kill of the X server so you can get a basic config file. To stop the Xserver once booted to the KDE login for a HD install use the CTRL and ALT and F1 keys at the same time or choose Console Login from the menu option in the login screen. Once to the command line login as normal user then use the su command to become root user and type in then enter key /etc/init.d/kdm stop to stop both the KDE display manager and the Xserver then use the command X -configure the screen should flicker a bit and you will be back at the command prompt with instructions on the command needed to test the new XF86config.new file that should have been created in the /root/ directory. Run the command and if you see a greyish screen on both monitors and can move the mouse then you have had success on the first try and only minor tweaking is need for the file. If not then more work will be required to get it going if you get the error that it cannot open the mouse and you are using a PS/2 wheel mouse the open the .new file and in the configured mouse section change the protocol from "auto" to "ImPS/2" and try again.
If it still does not work then you should be able to use the example below from my /etc/X11/XF86Config-4 along with the information for your card(s) in the .new file that was created to put together a working file.
Now you will need to change the refresh rates to the settings for your monitors in those sections and you should use the device sections from the .new file in place of the ones for my cards and you will want to start with just the three modes ( "1024x768" "800x600" "640x480" ) in the screen sections and then bump up the resolution if you want higher once you get a basic file going.Code:Section "ServerLayout"
Identifier "XFree86 Configured"
# Identifier "DualHead"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" LeftOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
# Option "Xinerama" "on"
EndSection
Section "Files"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
# FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/truetype/xfree86-nonfree"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/TrueType"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
# FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
# FontPath "/usr/X11R6/lib/X11/fonts/CID/"
EndSection
Section "ServerFlags"
# Option "Xinerama" "true"
EndSection
Section "Module"
# Load "GLcore"
# Load "dri"
Load "ddc"
Load "int10"
Load "bitmap"
Load "dbe"
Load "vbe"
Load "extmod"
Load "glx"
Load "record"
Load "xtrap"
Load "speedo"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
Option "XkbOptions" "crtl:nocaps"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "CorePointer"
Option "Protocol" "ImPS/2"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "True"
Option "ZAxisMapping" "4 5"
EndSection
# KDS Visual Sensations VS 190i
Section "Monitor"
#DisplaySize 350 265 # mm
Identifier "Monitor0"
Option "DPMS" "true"
VendorName "KDS"
ModelName "KDS1985"
HorizSync 30 - 95 # DDC-probed
VertRefresh 50 - 120 # DDC-probed
EndSection
# Daytek DT-1531D
Section "Monitor"
# DisplaySize 280 210 # mm
Identifier "Monitor1"
VendorName "OEC"
ModelName "15db"
HorizSync 30-69
VertRefresh 40-120
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: [i]: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # [i]
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # [i]
Identifier "Card0"
Driver "nvidia"
Option "NoLogo" "on"
Option "NvAgp" "1"
Option "RenderAccel" "On"
Option "IgnoreEDID" "on"
# Option "IgnoreDisplayDevices" "DFP, TV"
Option "NoBandWidthTest" "1"
VendorName "nVidia Corporation"
BoardName "NV17 [GeForce4 MX 440-SE]"
BusID "PCI:1:0:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: [i]: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "accel" # [<bool>]
#Option "crt_display" # [<bool>]
#Option "composite_sync" # [<bool>]
#Option "hw_cursor" # [<bool>]
#Option "linear" # [<bool>]
#Option "mmio_cache" # [<bool>]
#Option "panel_display" # [<bool>]
#Option "probe_clocks" # [<bool>]
#Option "reference_clock" # <freq>
#Option "shadow_fb" # [<bool>]
#Option "sw_cursor" # [<bool>]
Identifier "Card1"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "3D Rage Pro"
BusID "PCI:0:13:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
# SubSection "Display"
# Depth 1
# EndSubSection
# SubSection "Display"
# Depth 4
# EndSubSection
# SubSection "Display"
# Depth 8
# EndSubSection
# SubSection "Display"
# Depth 15
# EndSubSection
# SubSection "Display"
# Depth 16
# EndSubSection
SubSection "Display"
Depth 24
Modes "2048x1536" "1920x1440" "1856x1392" "1792x1344" "1600x1200" "1400x1050" "1280x1024" "1152x864" "1024x768"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
DefaultDepth 24
# SubSection "Display"
# Depth 1
# EndSubSection
# SubSection "Display"
# Depth 4
# EndSubSection
# SubSection "Display"
# Depth 8
# EndSubSection
# SubSection "Display"
# Depth 15
# EndSubSection
# SubSection "Display"
# Depth 16
# EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Hi,
Its a Sony Vaio Laptop with an ATIO Radeon Mobility 9000. The attached monitor is a sony E540. The vsync is 30-110 and the hsync is 48-170. The video has 128 mb of ram. As far as resolution I'd like 1280x1024 on both.. and I was booting off the cd.
Where would I find info for a future HD install?
Ryan
[quote="Stephen"]A little more information than what you have there will be required to help you get it done such as video card(s) make/model, amount of ram on it and the type of monitors you have their refresh rates both vertical and horizontal desired resolution of both the monitors and whether you want to use xinerama to have one large desktop or want to clone the display to both monitors. Oh and are you using the CD or a HD install if HD install which method??Quote:
Originally Posted by rmchale
Hello, I have a Gainward Ti4600 video card. One of the great features is the use of dual monitors with a large desktop, spaning from one to another, which work great in XP Pro, But I am trying to get away from windows and I want all my toyz to work. I am a multimedia freak, Use graphic programs, build web pages. use my Leadtek TV card which works great in Knoppix. I like to do work and watch my Divx and Xvid movies. Chat.......ect. So as you can see, I am a multi-tasker and once you get used to multiple monitors with a large drag and drop desktop. you don't wanna go back. Even two seperate Desktops would be great if possible. (ok enough, now to the problem)
If anyone can help I would appreciate it. I am still learning how to use this operating system and have trouble installing tars and using commands, but I am learning. So I may need detailed help.
Currently, I have both (different size monitors) monitors working but they are clones. The 2nd monitor is dark but working. I run from the knoppix 3.4 CD. I save my congif files to a zip drive. I run dual 1.666 MP/asus mobo , 2 gig ram. I have been reading the posts on the knoppix site and google for a couple months trying to find my answer. Only thing I found that MAY help is xinerama. But I am lost because of my inexperience. Anyone got any idea's ? Thanks in advance, this forum is great, and Knoppix ROCKS !!!!!!!
_X_
Hi everyone.
I have a matrox G450 16mb, and 2 cdt monitors 1 x 15 & 1 X 17.
this i have booting a knoppix3.4 170604 in a Liteon supadrive connected to a Gigabyte MB with 256 Mb ram screwed in to an aluminium tool case.
I am trying to get a seperate kde desktop on each monitor for web, graphics, general multitasking, or just a double width desktop.
when booting to knoppix the monitors echo each other until X kicks in, then #1 goes blank. I followed the above comprehensive instructions, but when i come to stop X, it wont. i go ctrl-alt-f1
i type /etc/init.d/kdm stop
but it gives me
Stopping K Desktop Manager : kdm not running (/var/run/kdm.pid not found)
I go to top and try to kill kdeinit and that restarts X and kde.
so, i reboot knoppix 2 for text only, run X -configure, and great, it flashes, and after i enter the resulting command, i get a mouse on both screens. Brill!!
so
cd /etc/X11
mv XFree86config XFree86config.old
cp /XFree86config.new ./XFree86config
init 5
screens flicker, and i get my single screen again.
my question is this, where am i going wrong?
also Dual Head computing is getting not only more popular, but also a neccessity in this design climate, why does knoppix not run x -configure on booting to see my 2 monitors, or is it "on the list".