Not sure if this is what you wanted.....
To insert a driver use modprobe (as root of course):
modprobe mdc800
But hotplug *should* do that for you.
Hi. I`m new...
If I boot Knoppix 3.4 from CD and plug in my USB-Digicam annything works fine. -The Camera ist noticed as sbd1. If I made the HD-Installation in this condition I suppose after reboot from HD the USB-Camera will be noticed. My USB-Stick works fine this way.
The Problem: I only can Plugin one Thing (Camera or USB-Stick) while the Installation because I only got one USB-Slot.
While booting from CD I suppose the USB-Modul dc2xx (kodak) or mdc800 (mustek) is used with Hotplug.
My big Question: How can I Install one of the USB-Modules (kodak or mustek) after installing Knoppix (the way like debian) on HD. -In other cases my Installation works quite fine
Thanks for help
Not sure if this is what you wanted.....
To insert a driver use modprobe (as root of course):
modprobe mdc800
But hotplug *should* do that for you.
If you want it loaded at each boot, add the module name to /etc/modules-$KERNERVERSION
Hotplug does what it wants to, especially for 2.6.n kernels
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$299.99
Dell PowerEdge R630 8SFF 2.6Ghz 20-Core 128GB Mem 4x1G RJ-45 NIC 2x750W PSU
$399.04
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$721.06
CSE-118 Supermicro 1U 3x GPU Server 2.1Ghz 16-C 128GB CX353A 2x1600W PSU Rails
$450.03
INTEL XEON GOLD 6148 20 Core SR3B6 2.4GHZ 27.5MB Processor @24
$99.99
Intel Xeon Gold 6140 SR3AX 2.3GHz 18-Core Processor CPU
$39.99
Intel Xeon Gold 6138 2.0GHz 27.5MB 20-Core 125W LGA3647 SR3B5
$46.00
Intel Xeon E5-2690V2 3.00GHz 10-Core (SR1A5) Processor CPU READ DESCRIPTION
$12.00
HP Workstation Z640 2x Xeon E5-2623V4 32GB Ram 512 SSD Quadro K420 Linux GA
$243.59
Dell Precision 5810 Tower Intel Xeon E5-1603v3 2.8GHz 8GB RAM 500GB HDD W10P GPU
$129.99