Not sure if this is what you wanted.....
To insert a driver use modprobe (as root of course):
modprobe mdc800
But hotplug *should* do that for you.
Hi. I`m new...
If I boot Knoppix 3.4 from CD and plug in my USB-Digicam annything works fine. -The Camera ist noticed as sbd1. If I made the HD-Installation in this condition I suppose after reboot from HD the USB-Camera will be noticed. My USB-Stick works fine this way.
The Problem: I only can Plugin one Thing (Camera or USB-Stick) while the Installation because I only got one USB-Slot.
While booting from CD I suppose the USB-Modul dc2xx (kodak) or mdc800 (mustek) is used with Hotplug.
My big Question: How can I Install one of the USB-Modules (kodak or mustek) after installing Knoppix (the way like debian) on HD. -In other cases my Installation works quite fine
Thanks for help
Not sure if this is what you wanted.....
To insert a driver use modprobe (as root of course):
modprobe mdc800
But hotplug *should* do that for you.
If you want it loaded at each boot, add the module name to /etc/modules-$KERNERVERSION
Hotplug does what it wants to, especially for 2.6.n kernels
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$269.99
Dell Poweredge R640 Server | 2x Xeon Gold 6132 | 128GB | H730P | 8x HDD Trays
$1849.00
HP ProLiant DL360 G9 Server | 2 x E5-2660V3 2.6Ghz | 64GB | 2 x 900GB SAS HDD
$339.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
Dell PowerEdge R620 Server 2x E5-2650 V2 = 16 Cores H710P 128GB RAM 2x 600GB SAS
$274.99