Not sure if this is what you wanted.....
To insert a driver use modprobe (as root of course):
modprobe mdc800
But hotplug *should* do that for you.
Hi. I`m new...
If I boot Knoppix 3.4 from CD and plug in my USB-Digicam annything works fine. -The Camera ist noticed as sbd1. If I made the HD-Installation in this condition I suppose after reboot from HD the USB-Camera will be noticed. My USB-Stick works fine this way.
The Problem: I only can Plugin one Thing (Camera or USB-Stick) while the Installation because I only got one USB-Slot.
While booting from CD I suppose the USB-Modul dc2xx (kodak) or mdc800 (mustek) is used with Hotplug.
My big Question: How can I Install one of the USB-Modules (kodak or mustek) after installing Knoppix (the way like debian) on HD. -In other cases my Installation works quite fine
Thanks for help
Not sure if this is what you wanted.....
To insert a driver use modprobe (as root of course):
modprobe mdc800
But hotplug *should* do that for you.
If you want it loaded at each boot, add the module name to /etc/modules-$KERNERVERSION
Hotplug does what it wants to, especially for 2.6.n kernels
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
2U 12 Bay SAS3 SuperMicro Server 6028U-TR4T+ W/ X10DRU-i+ Barebone 12 Caddy RAIL
$299.00
HP/HPE ProLiant AMD Opteron X3216 APU 16 GB RAM MicroServer Gen 10 NO DRIVES
$299.99
HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES
$199.99
HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*
$94.99
HP ProLiant Xeon E3-1220L V2 2.30 GHz 16 GB RAM MicroServer Gen8 NO DRIVES
$199.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.19
RackChoice 2U Micro ATX Compact Rackmount 2 x 5.25 Chassis Support ATX PS2
$96.00
Supermicro 505-2 Mini-1U Server 5018A-FTN4 16GB 2.4ghz Atom + Rack Ears
$199.00