An external modem should be easier to comfigure especially for knoppix from cd. I've used USR/3Com and Zoom external modems. Most current pci hardware modems run on a nonstandard serial port.
rock
I understand that linux requires a hardware controled modem.
I also have already found several lists of modems that work. But they just list as yes/no.
Since I am going to have to buy a new modem I would realy like some personal biased oppinions on what the best dial-up modem is. What have you used with success, what brands would you avoid? Is there any real advantage to using an external over a harware controlled PCI modem?
THanks.
An external modem should be easier to comfigure especially for knoppix from cd. I've used USR/3Com and Zoom external modems. Most current pci hardware modems run on a nonstandard serial port.
rock
If you are out in the rural part of the country & using dial up, I suggest getting on old external MultiTech modem. My internal Win 56k modem never connects above 38,400. It is a 56k modem. The MultiTech I'm using is a MT2834ZDXb which has 33k connect capabilities. It is an external modem & is on the 1st serial port (/dev/ttys0) Remember real computer people start counting with 0! I suppose an external 56k modem would be faster. Remember most of the older modems have a 25pin female connector, so you will probably need a 25 pin male to 9 pin female cable.
Hobby_1
if anybody is following this, I decided on a Creative labs modemblatser external 56k v.92 serial modem. not because of any special features, but jut because BestBuy had onein an open box at a decent discount. It works great. i used kPPP and was online in a matter of minutes. Thanks for the help. i'm realy glad i decided to go external.
I'm brand new to Knoppix, just tried it last night.
Do I understand that using my internal device will not work? No moden was auto detected.
tnx
redcat
tip 01
Avoid USB external dial-up modems. - especially Olitec - no drivers available!
I use an older COM1 36kB olitec with kppp = ttyso under linux
Works just fine.
tip 02 avoid Internal PCI or Plug-in or WinModems - they are NOT supported and will NOT work.
That's just not true. Internal PCI controller-based modems should work--they'll just appear as ordinary serial ports. While it's possible to make some controllerless or soft modems work, you're much better off using a "real" modem if that's an option. As I've stated elsewhere in the forums, controller-based internal -or- external serial (not USB) modems are your best choice for desktop machines. For laptops with built-in modems, the effort required to obtain proprietary drivers may be justifiable.Originally Posted by ozfrog
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES
$199.99
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.19
HP ProLiant Xeon E3-1220L V2 2.30 GHz 16 GB RAM MicroServer Gen8 NO DRIVES
$199.99
HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*
$94.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
Supermicro 5018A-FTN4 Rack Server - Black
$125.00
Supermicro 813M-4 2x E5-2630 v3 128GB 8x16 GB Ram Rack Mountable Server
$199.99
SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD
$90.00
2U 12 Bay SAS3 SuperMicro Server 6028U-TR4T+ W/ X10DRU-i+ Barebone 12 Caddy RAIL
$299.00