It depend which knoppix are you using, more exactly 'which kernel are you using'.
Afaik only kernel 2.6 support usb 2.00. So if your knoppix vers. is lower than 3.8 and you boot with the default 2.4 kernel, that's why it is so slow.
I'm am transferring data from a internal drive to a external usb 2.0 drive but I am only getting speeds of 1.5mb/s. Anyone know why I can't get speeds faster than that since its using usb 2.0. I have a usb 2.0 pci card to.
It depend which knoppix are you using, more exactly 'which kernel are you using'.
Afaik only kernel 2.6 support usb 2.00. So if your knoppix vers. is lower than 3.8 and you boot with the default 2.4 kernel, that's why it is so slow.
I'm not sure what the Kernel version is but I'm using Knoppix 4.02 so I'm guessing the kernel is later than 2.8. Do I need to load a module or something to get those speeds? If so which module?
Kernel 2.8 doesn't exist, 2.6 is the last
Anyway you're not lucky, knoppix 4.0.2 comes with a usb bug
What version support usb 2.0 high speed, do you know?
All starting from 3.4. Just consider that in knoppix 3.4 and 3.7 booting with the kernel 2.6 is an option (not default, coming this versions with both 2.4 and 2.6 kernels) while in 3.8 and higer it is 'the only kernel' and so the default.Originally Posted by play1962
CISCO UCSB-B200-M4 UCS BLADE SERVER UCS-SP-B200M4-S1
$175.00
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB
$2699.99
SUN Blade X6250 Server 8GB RAM DUAL PROCESSORS 594-4531-01
$109.99
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6134 64C 1TB
$3299.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Dell PowerEdge C6400 Blade Server Chassis w/ 2x 2400W PSUs - Preproduction Model
$399.00
Dell PowerEdge FC630 Blade w60
$75.00
Dell PowerEdge M620 Blade Server
$39.99
UCSB-B200-M4 UCS Blade Server, 2x E5-2667 V3, 256GB RAM DDR4, 2x 300GB Drives
$299.99