Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: Knoppix and my wireless adapter problem

  1. #1
    Junior Member
    Join Date
    Jul 2010
    Posts
    7

    Knoppix and my wireless adapter problem

    Hi all, I'm new to Knoppix and new to linux environment in general.

    My notebook is an Acer Aspire 5024WLMi (5020 series) with a Broadcom BCM4318 wireless adapter, and I run Knoppix 6.2.1 (CD, DVD, USB... I have them all . I know there are already lots of guide for wlassistant or ndiswrapper, but there's always something wrong or something missing for a very noob user like me.

    Two questions:

    1) Is there any Knoppix release that already has a driver support for my wlan card? (an already done release or at least someone who can modify the latest release to make it work for my card?)

    or

    2)Is there someone who can help me step-by-step, very deeply step-by step , configuring my wireless to work?

    Please help

  2. #2
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    titomax82

    I know a lot of people have trouble with Broadcom wifi,
    but I think you are in luck. I think the BCM 4318 is provided with
    a native driver in Knoppix 6.2.1.

    1. I don't think you need ndiswrapper.
    2. Maybe you just need to know how to work with Network Manager.
    3. First of all, how did you get here? Ethernet? Router?

  3. #3
    Junior Member
    Join Date
    Jul 2010
    Posts
    7
    I want to connect to my Netgear Wireless DG834PN router... how can i do?

  4. #4
    Junior Member
    Join Date
    Jul 2010
    Posts
    7
    I get here with the same notebook using wireless in windows

  5. #5
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    198
    Open /etc/modprobe.d/broadcom-sta-common.conf and comment out the line that says : blacklist b43
    That should work for you. Please write back if it does not as there are other ways to fix this

  6. #6
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    @mecho

    I have a bcm43xx card.
    I don't think you want to go that way.

  7. #7
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    I have a BCM 4315.
    Here's what my /etc/modprobe.d/broadcom-sta-common.conf looks like.

    # wl module from Broadcom conflicts with ssb
    # We must blacklist the following modules:
    blacklist b44
    blacklist b43legacy
    blacklist b43
    blacklist ssb
    install wl /sbin/modprobe --ignore-install wl $CMDLINE_OPTS

    It ends up installing wl, and lib80211_crypt_tkip.
    I think this is standard Knoppix 6.2.1 issue, not my invention.
    Works fine for me.

    It's not 'native' as I thought, obviously, but I'm no purist.

  8. #8
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    198
    Well for what I know is that the latest b43 driver works well even with bcm4318. He can google it again - there is tons of information about this specific wireless card especially in ubuntu forums. What I see as solution is that many people just remove it from restricted drivers and it works just fine. If it does not - there is no damage done

  9. #9
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    My Laptop has a BCM 4315 wireless card.

    I loaded my Knoppix 6.2.1 CD.
    Waited for a while until a desktop appeared.
    Shortly a Network Manager applet also appeared on the lower right panel.
    Almost immediately a notice 'Wireless network available' also appeared.
    Clicked this applet and selected my ESSID by name.
    Next a panel appeared asking for my WEP key which I provided.
    Clicked connect.
    Another panel asked for a passwork and I declined.
    Waited a short while with animated applet circling.
    Very shortly the applet was showing three bars.
    Then I started typing this note using Leafpad.

    When I'm done typing I'll do the following:
    Fire up a browser.
    Find and Log into Knoppix forum.
    Post this note.

    I declare I have not changed any configuration files or such.
    This thing just works.
    I hope it does the same for you, titomax82.

    tada!
    Last edited by utu; 07-27-2010 at 04:04 AM.

  10. #10
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    198
    @Utu

    He has BCM4318 card. It is not supported by broadcom-wl, but it is by b43.All he needs to do is make sure he has b43-fwcutter and firmware-b43-installer, then uncomment the b43 driver. But I might be wrong. I do not own broadcom card

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Cisco SFP-25G-SR-S 25GBPS Multi-Mode SFP+ Transceiver Module 1 Year Warranty picture

Cisco SFP-25G-SR-S 25GBPS Multi-Mode SFP+ Transceiver Module 1 Year Warranty

$333.00



Cisco SG110 24 Port Gigabit Ethernet Switch w/ 2 x SFP SG110-24 picture

Cisco SG110 24 Port Gigabit Ethernet Switch w/ 2 x SFP SG110-24

$117.00



Cisco Nexus N55-D160L3-V2 2 Ports Daughter Card Expansion Module 1 Year Warranty picture

Cisco Nexus N55-D160L3-V2 2 Ports Daughter Card Expansion Module 1 Year Warranty

$395.00



Cisco Meraki MA-SFP-10GB-SR SFP+ 10GBPS Multi-Mode Transceiver Module 1YearWrnty picture

Cisco Meraki MA-SFP-10GB-SR SFP+ 10GBPS Multi-Mode Transceiver Module 1YearWrnty

$128.00



Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03  picture

Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03

$8.00



For Cisco SFP-10G-T, Ubiquiti UF-RJ45-10G Module 10G SFP+ to RJ45 10GBase-T picture

For Cisco SFP-10G-T, Ubiquiti UF-RJ45-10G Module 10G SFP+ to RJ45 10GBase-T

$48.59



NEW Sealed Cisco SFP-10G-SR-S 10G SR SFP+ Module 850nmMM *US Shipping* picture

NEW Sealed Cisco SFP-10G-SR-S 10G SR SFP+ Module 850nmMM *US Shipping*

$15.00



GENUINE Cisco SFP-GE-T EXT 30-1421-01 USA 1000BASE-T RJ45 SFP Transceiver picture

GENUINE Cisco SFP-GE-T EXT 30-1421-01 USA 1000BASE-T RJ45 SFP Transceiver

$9.99



10 PCS Cisco GLC-LH-SMD 10-2625-01 1310nm SFP Transceiver Module picture

10 PCS Cisco GLC-LH-SMD 10-2625-01 1310nm SFP Transceiver Module

$85.00



NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping* picture

NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*

$18.00