Results 1 to 6 of 6

Thread: install Knoppix to external hard drive

  1. #1
    Member registered user
    Join Date
    Aug 2009
    Location
    Costa Rica
    Posts
    33

    install Knoppix to external hard drive

    Well, I am about to my wits end trying to install Knoppix to an external (USB) hard drive. I believe the
    problem is that the drive is too large and my computers BIOS will not boot a FAT32 device that is 320Gb.

    So, what I am wondering is if I can install Knoppix to the external hard drive by using the "Install to Hard Drive" option. I suppose that the program will want to install to my internal hard drive, the one containing my Windows OS, and I do NOT want that to happen. What I am wondering is this: Can I disconnect my SATA drive, containing Windows, then boot the computer using the CD? At that point would I be able to use the Install to Hard Drive program and install to the USB drive?

    An alternative would be to download the Ubuntu 7.04 iso and install that to the USB drive. Ubuntu has the capability to install to the external drive.

    I would prefer to install Knoppix, so if anyone can help me out I would be grateful.

    John

  2. #2
    Member registered user
    Join Date
    Aug 2009
    Location
    Costa Rica
    Posts
    33
    By the way, I tried partitioning the drive so that the first partition was 8Gb, to avoid any BIOS limitations, and still was not able to get the drive to boot.

  3. #3
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    512
    How did you find out that your USB HDD could not be booted?

    Did you create a primary partition and mark it as bootable in the partition table?

    Did you install grub4dos or syslinux?

    If the BIOS does not like booting a FAT32 partition you could create a small (less than 2 GB) partition with FAT16 and use it as a boot partition.

    The Knoppix CD does not depend on the presence of an internal HDD. All you need is a CD-ROM drive. After booting the external HDD should be found by Knoppix and be usable. If you decide to install Knoppix to a hard disk drive you have to create a partition formatted to reiserfs unless you want an install with persistent image. You will also need a swap partition greater than 1 GB.

    I hope this helps.

  4. #4
    Member registered user
    Join Date
    Aug 2009
    Location
    Costa Rica
    Posts
    33
    I partitioned the USB HDD using Gparted. I made the first partition (primary) as 8Gb and flagged it as bootable. I then used flash-knoppix to install to the USB HDD. When I rebooted the computer, the USB HDD was not in BIOS list of bootable devices. Interestingly, when I test the hard drive with a program called TestDisk, the drive shows as being bootable. I also plugged the hard drive into a different computer and it does not show up in the boot list for the BIOS of the other computer.

    I used the flash-knoppix installerto install the Knoppix to the USB HDD and it installed syslinux. I don't know how to install grub4dos . Can that be done after installing with flash-knoppix and do you think that would cure the problem?

    I understand that the Knoppix CD does not require the presence of an internal HDD although I notice a lot of HDD activity when Knoppix is loading. Not sure why!! Yes, I would want to have a persistent image, so I would not be wanting to format with reiserfs. Here is another interesting thing that I saw: I formatted the primary partition with reiserfs and rebooted the computer. The USB HDD showed up in the BIOS boot list so the problem mostly likely is related to the boot record.

    Any suggestions will be helpful. Is there a well documented procedure that I could read that describes installing to a USB HDD? Most of what I find is not that easy to understand for a novice.

    Thanks,
    John

  5. #5
    Member registered user
    Join Date
    Aug 2009
    Location
    Costa Rica
    Posts
    33
    By the way, is grub4dos usable in this context? I just read that it is not usable on all PC's and looks to me like it is more for Windows OS's .

  6. #6
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    512
    You could also try grub legacy which comes with Knoppix 6.7.1 if your BIOS does not like syslinux.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Cisco SG95-16 16-Port Gigabit Switch SG95-16-KR picture

Cisco SG95-16 16-Port Gigabit Switch SG95-16-KR

$47.00



Cisco WS-C3750-48PS-S 48-Port Managed Gigabit Switch picture

Cisco WS-C3750-48PS-S 48-Port Managed Gigabit Switch

$45.00



Cisco WS-C2960C-8PC-L 2960-C 8 Ports PoE Manageable Switch 1 Year Warranty picture

Cisco WS-C2960C-8PC-L 2960-C 8 Ports PoE Manageable Switch 1 Year Warranty

$77.00



Cisco Catalyst 3850 48 PoE+ 48-Port Gigabit Managed Switch WS-C3850-48F-E picture

Cisco Catalyst 3850 48 PoE+ 48-Port Gigabit Managed Switch WS-C3850-48F-E

$219.99



New Linksys SE3005 5-port Gigabit Ethernet Switch picture

New Linksys SE3005 5-port Gigabit Ethernet Switch

$15.99



Linksys SE3008 8 Ports Rack Mountable Gigabit Ethernet Switch picture

Linksys SE3008 8 Ports Rack Mountable Gigabit Ethernet Switch

$18.99



*NETGEAR PROSAFE (JGS524V2) 24-Port Gigabit Ethernet Switch *NO AC* picture

*NETGEAR PROSAFE (JGS524V2) 24-Port Gigabit Ethernet Switch *NO AC*

$29.99



TP-Link TL-SF1005D 5-Port 10/100Mbps Fast Ethernet Desktop Switch picture

TP-Link TL-SF1005D 5-Port 10/100Mbps Fast Ethernet Desktop Switch

$12.99



YuanLey 10 Port Gigabit PoE Switch With 8 Poe Unmanaged with 2 1000Mbps Uplink picture

YuanLey 10 Port Gigabit PoE Switch With 8 Poe Unmanaged with 2 1000Mbps Uplink

$20.00



Cisco Small Business SG200-26 26 Port Smart Gigabit Ethernet Network Switch picture

Cisco Small Business SG200-26 26 Port Smart Gigabit Ethernet Network Switch

$43.95