Did you try this command in a terminal:
Code:sudo leafpad /etc/X11/Xsession.d/15x11-synaptics
This problem has been addressed on this forum before but I can't make the answer work. Touchpad tapping is not enabled by default, but 'synclient TapButton1=1' from a console at run level 5 enables it. It does not work from run level 2 because that is not a graphical environment. In order to make the change permanent the advice is to go to /etc/X11/Xsession.d and add a file say '15x11-synaptics' with this content : synclient "TapButton1=1". The problem is that the file system is mounted read-only and chmod doesn't work. You can't find the file on the unmounted flash drive. How can you get this line in Xsession.d?
Did you try this command in a terminal:
Code:sudo leafpad /etc/X11/Xsession.d/15x11-synaptics
Greetings was698002 and welcome to the forum.
All but one of the files in /etc/X11/Xsession.d are owned by root and read-only.
However, one file, 45knoppix, is owned by root and also executable.
I add a synclient command to this file, at its end, to tweak my touchpad.
This is slightly simpler than adding a new file just for this one tweak.
Quote marks are not necessary for the command.
Of course, you'll need to have persistence working for this to make a permanent
change to your system.
The lack of touchpad support is the one single frustrating thing about Knoppix.
What is persistence mode and how does one achieve it?
Can you upload the specific changes that need to be made to Knoppix (text/file/folder) to make touchpad work reliably
Other Linux distros have an app in settings that allows touchpad to be toggled. Why is Knoppix different?
in 7.7.1 the program you are asking about in in a package called gpointing-device-settings. If you install that you will have control of it via GUI. The persistence stuff is covered in http://knoppix.net/forum/threads/319...th-persistence
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2630V3 | 32GB | P244BR | 2x300GB 15K
$299.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 32GB | P204I | 2x900GB 10KRPM
$1499.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Cisco UCS B200 M5 V07 Blade Server chassis with (2x) Heatsinks
$299.99
Dell PowerEdge M620 Blade Server
$39.99
HP ProLiant BL460c Gen9 Blade 2x E5-2660v3 2.6GHz =20 Cores 64GB P246 650FLB
$196.00