Results 1 to 7 of 7

Thread: Touch pad scroll not working on knoppix 7.05

  1. #1
    Senior Member
    Join Date
    Nov 2011
    Posts
    127

    Touch pad scroll not working on knoppix 7.05

    Acer Aspire laptop 7741Z-4643 I've just created a new USB boot disk with knoppix 7.05 and the touchpad vertical scroll is either not working or it is very unreliable. On my 7.03 USB boot drive that I still have, the touchpad scroll still works fine when I boot with this drive My suspicion is that, I think there is a table that defines the touch pad location for scroll that is out of whack on 7.05 Stranglely, rarely on 7.05, the scroll, once in a great while the scroll, will work once and rotate the desktop, but can't seem to do it again. Anyone else have the same issue with the laptop touchpad scroll? Ideas? Oddly, in all previous versions of knoppix that I've tried, the touchpad vertical scroll has always worked, before 7.05 and it has not worked with with ubuntu. = = = = Just descovered that executing this command from the terminal window, solves the probelm in 7.0.5 synclient VertEdgeScroll=1 How would I do this automatically?
    Last edited by Denver Dave; 01-16-2013 at 06:30 AM.

  2. #2
    Senior Member
    Join Date
    Nov 2011
    Posts
    127
    Sorry about the run together paragraphs in the previous post, just figured out I needed to turn the noscript off for this page after I lost the ability to edit the post.

    = = = = =

    Acer Aspire laptop 7741Z-4643 I've just created a new USB boot disk with knoppix 7.05 and the touchpad vertical scroll is either not working or it is very unreliable. On my 7.03 USB boot drive that I still have, the touchpad scroll still works fine when I boot with this drive

    My suspicion is that, I think there is a table that defines the touch pad location for scroll that is out of whack on 7.05 Stranglely, rarely on 7.05, the scroll, once in a great while the scroll, will work once and rotate the desktop, but can't seem to do it again. Anyone else have the same issue with the laptop touchpad scroll? Ideas?

    Oddly, in all previous versions of knoppix that I've tried, the touchpad vertical scroll has always worked, before 7.05 and it has not worked with with ubuntu.

    = = = =
    Just descovered that executing this command from the terminal window, solves the probelm in 7.0.5 synclient VertEdgeScroll=1 How would I do this automatically?

  3. #3
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    Quote Originally Posted by Denver Dave View Post
    Just descovered that executing this command from the terminal window, solves the probelm in 7.0.5 synclient VertEdgeScroll=1 How would I do this automatically?
    You might try adding your synclient command to /etc/X11/Xsession.d/45knoppix.

    Here's how I disable my touchpad:
    Add synclient TouchpadOff=1 to /etc/X11/Xsession.d/45knoppix.
    That is, just add a line to whatever is already there.
    I do it this way because adding it to /etc/rc.local doesn't work for me.

  4. #4
    Senior Member
    Join Date
    Nov 2011
    Posts
    127
    Thanks - that fixed the touchpad vertical scroll on a permanent basis. Didn't realize how much I used the vertical scroll. Seems like a bug in 7.05 to me, since worked in previous versions.

    Note to self and others that don't have a clue:
    Tried the file manager - could not edit system files, even after selected show hidden files
    Tried sudo pcmanfm (name of file manager), didn't seem to help
    From terminal editor: sudo gedit
    added: synclient VertEdgeScroll=1; (with the above the last line in 45knoppix
    Last edited by Denver Dave; 01-18-2013 at 04:59 AM.

  5. #5
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    Quote Originally Posted by Denver Dave View Post
    Thanks - that fixed the touchpad vertical scroll on a permanent basis. Didn't realize how much I used the vertical scroll. Seems like a bug in 7.05 to me, since worked in previous versions.
    Glad this worked for you, Dave.

    I have no opinion on whether your problem is a bug.

    However, if you think it is, you might say so on Klaus K's site:
    http://lists.debian.org/debian-knoppix

  6. #6
    Senior Member
    Join Date
    Nov 2011
    Posts
    127
    I hadn't used knoppix for a while and I installed 7.7.1. Couldn't get my laptop scroll bar to work and I remembered this thread. Still works - thanks.

  7. #7
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    Quote Originally Posted by Denver Dave View Post
    I hadn't used knoppix for a while and I installed 7.7.1. Couldn't get my laptop scroll bar to work and I remembered this thread. Still works - thanks.
    Glad this worked for you, Dave.

    There is another approach which I find useful described by Klaus2008 at:
    http://knoppix.net/forum/threads/307...ight=autostart

    I now use that approach to tweak Touchpad and Caps_Lock functions.

    Best Regards.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x600Gb SAS, Proxmox picture

Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x600Gb SAS, Proxmox

$340.00



Dell EMC NX3230 Server picture

Dell EMC NX3230 Server

$599.99



Dell PowerEdge R730 Server 2x E5-2698v3 2.30Ghz 32-Core 256GB H730 Rails picture

Dell PowerEdge R730 Server 2x E5-2698v3 2.30Ghz 32-Core 256GB H730 Rails

$786.85



1PCS FOR Supermicro X7DVL-3 dual 771 Supports Quad-core CPU Server Motherboard picture

1PCS FOR Supermicro X7DVL-3 dual 771 Supports Quad-core CPU Server Motherboard

$240.29



DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45 picture

DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45

$275.00



Dell PowerEdge R620 Server 2x Xeon  E5-2620 @ 2.0GHz 64GB RAM NO HDDs picture

Dell PowerEdge R620 Server 2x Xeon E5-2620 @ 2.0GHz 64GB RAM NO HDDs

$108.96



Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD picture

Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD

$389.99



HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5

HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601

$89.99



1U Supermicro Server X10DRU-i+ 2x Xeon E5-2690 V4 28 Cores 64GB 4x 10GBE-T 2PS picture

1U Supermicro Server X10DRU-i+ 2x Xeon E5-2690 V4 28 Cores 64GB 4x 10GBE-T 2PS

$324.00



HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD picture

HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD

$191.95