-
File copy gives error message "Success"
Hi all, Recently a motherboard in an old pc of mine toasted itself... It contained some important data, so I pulled out the HDD and put it in my good pc and booted Knoppix (the old one was running Debian, so I couldn't pull out the data with Windows *sigh*). However, when I try to copy my data to an USB HDD, I randomly keep getting the error message "Success" and then PCMan stops copying the files... It doesn't show up with every file and it doesn't even occur for the same file everytime. Quite a strange error message and I can't find any info related to it. This is no issue of having not enough space on my external HDD, because I have 971,9 GB left. That should be enough for 18GB of data, right? Could it have something to do with the fact that the HDD is (probably) NTFS formatted? Knoppix seems to be using FUSE for this, and I am totally unfamiliar with that system... Here is the line mount gives me for the external HDD:
Code:
/dev/sdf1 on /media/sdf1 type fuseblk (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000,allow_other,blksize=4096)
Thanks in advance, Eric Spreen
-
Originally Posted by
erispre
Hi all, Recently a motherboard in an old pc of mine toasted itself... It contained some important data, so I pulled out the HDD and put it in my good pc and booted Knoppix (the old one was running Debian, so I couldn't pull out the data with Windows *sigh*). However, when I try to copy my data to an USB HDD, I randomly keep getting the error message "Success" and then PCMan stops copying the files... It doesn't show up with every file and it doesn't even occur for the same file everytime. Quite a strange error message and I can't find any info related to it. This is no issue of having not enough space on my external HDD, because I have 971,9 GB left. That should be enough for 18GB of data, right? Could it have something to do with the fact that the HDD is (probably) NTFS formatted? Knoppix seems to be using FUSE for this, and I am totally unfamiliar with that system... Here is the line mount gives me for the external HDD:
Code:
/dev/sdf1 on /media/sdf1 type fuseblk (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000,allow_other,blksize=4096)
Thanks in advance, Eric Spreen
Two possibilities: 1) There's a problem with the old drive and/or filesystem; have you tried looking at it with GParted? It might tell you something useful. If it's NTFS, you can download a disk called "Hiten's BootCD", which will at least allow you to do a DOS chkdsk command.
2) There's something goofy with Pcman, and it can be done with a cp command in lxterm. You can Google for more on copying at the command line.
Hope that helps!
Krishna
-
Senior Member
registered user
@erispre
If you like to find out more about the filesystem's type on your USB HDD then you can use the blkid command.
Code:
sudo blkid /dev/sdf1
Do you use Knoppix 6.2.1? You could try GNU Midnight Commander mc instead of PCMan Filemanager.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
HyperX FURY RAM DDR4 16GB 8GB 32GB 4GB 3200 2666 2400 2133 Desktop Memory DIMM
$9.64
A-Tech 16GB 2 x 8GB PC3-12800 Laptop SODIMM DDR3 1600 Memory RAM PC3L 16G DDR3L
$27.98
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
CRUCIAL DDR3L 8GB 16GB 32GB 1600 MHz PC3-12800 Laptop Memory RAM SODIMM 204-Pin
$14.35
HMT84GL7AMR4C-RD 32GB DDR3 Server Memory RAM 14900L ECC REG 4Rx4 SK Hynix Cisco
$13.99
A-Tech 16GB 2x 8GB PC3-12800 Desktop DDR3 1600 MHz 240pin DIMM Memory RAM 16G 8G
$27.98
Crucial DDR3 16GB 1600 2x 8GB PC3-12800 Laptop SODIMM Memory RAM PC3L 16G DDR3L
$21.95
Hynix 64GB 4Rx4 PC4-2133P-L LRDIMM DDR4-17000 ECC Load Reduced Server Memory RAM
$64.99
A-Tech 64GB 4x 16GB 2Rx4 PC4-19200R DDR4 2400MHz ECC REG RDIMM Server Memory RAM
$87.96