-
Junior Member
registered user
Graphics cards - just my luck?
I have just come across Knoppix while looking for a way to recover a damaged hard disk.
But I can't get 3.3 to recognize any of the 3 graphics cards I have available. These are:
Nvidia GeForce 2 (64mb)
Voodoo 3 (12mb I think)
ATI 3D Rage Pro (atir3) (from an old computer)
I get the "No suitable x-server found for your card" with each, after it tries "fbdev" and "vesa".
I understand there are difficulties with Nvidia cards, but the other two are surely common enough, even if old! Is it just my luck that I happen to have 3 which won't work with Knoppix - or am I missing something?
I have tried the "failsafe" cheat code, and putting in the xserver name Knoppix shows on the way through.
Or can someone suggest a common and cheap card which always does run Knoppix? Resolution, optical quality, etc are not issues.
Also am I right in assuming that the message on the login screen about the German keyboard would have been taken care of on a uk-produced copy (*-EN.iso)? The "=" sign seems to work normally.
My system is a 1300 mhz Duron with 512MB Ram
Many thanks for any suggestions/aclarations
David
-
Senior Member
registered user
Re: Graphics cards - just my luck?
![Quote](images/misc/quote_icon.png)
Originally Posted by
Davidsa
I have just come across Knoppix while looking for a way to recover a damaged hard disk.
But I can't get 3.3 to recognize any of the 3 graphics cards I have available. These are:
Nvidia GeForce 2 (64mb)
Voodoo 3 (12mb I think)
ATI 3D Rage Pro (atir3) (from an old computer)
I get the "No suitable x-server found for your card" with each, after it tries "fbdev" and "vesa".
I understand there are difficulties with Nvidia cards, but the other two are surely common enough, even if old! Is it just my luck that I happen to have 3 which won't work with Knoppix - or am I missing something?
Those cards should work fine I have both a Voodoo3 and the ATI card that you have not sure about the GF2 though never tried one of them but it should work. For the ATI card when you get to the startup screen type in knoppix xmodule=ati xvrefresh=60 then the enter key to tell knoppix to use the ati module and a low refresh rate in case you are using an older monitor you may want to add a screen= on the end for the resolution you want eg. screen=800x600 or screen=1024x768 ... . For the nvidia card use xmodule=nv in the line, the Voodoo3 use xmodule=tdfx. Some other cheat codes you may want to look at.
Also am I right in assuming that the message on the login screen about the German keyboard would have been taken care of on a uk-produced copy (*-EN.iso)? The "=" sign seems to work normally.
My system is a 1300 mhz Duron with 512MB Ram
Many thanks for any suggestions/aclarations
David
Yes when the iso has the -EN in the name it should be an English version. BTW you do not need an X server to rescue a disk you can do it at the command line.
-
Junior Member
registered user
Stephen:-
Thanks for your suggestons all of which I tried, as well as trying the CD on another computer.
But it seems I had a bad copy of version 3.3. I have now got a CD of version 4.4 and it works just fine, without putting anything in at the prompt.
These things simply happen now and again!
Thanks anyway
David
-
Junior Member
registered user
Sorry - I mean 3.4 of course.
David
Similar Threads
-
By I S in forum Hardware & Booting
Replies: 0
Last Post: 06-28-2005, 07:12 PM
-
By Krogen in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 05-21-2005, 06:45 PM
-
By zippix in forum The Lounge
Replies: 1
Last Post: 06-12-2004, 02:23 AM
-
By ShavedHawk in forum Hardware & Booting
Replies: 5
Last Post: 10-01-2003, 04:13 AM
-
By cYmen in forum Hardware & Booting
Replies: 0
Last Post: 06-13-2003, 07:10 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![Samsung 870 EVO 2TB 2.5](/store/img/g/lkYAAOSwDr5kR7aY/s-l225/Samsung-870-EVO-2TB-2-5-SATA-III-Internal-SSD-MZ-7.jpg)
Samsung 870 EVO 2TB 2.5" SATA III Internal SSD (MZ-77E2T0B/AM)
$150.00
![Samsung Galaxy Tab A9+ Plus 5G 11](/store/img/g/UXsAAOSwbK5mhJca/s-l225/Samsung-Galaxy-Tab-A9-Plus-5G-11-64GB-Graphite-T-M.jpg)
Samsung Galaxy Tab A9+ Plus 5G 11" 64GB Graphite - T-Mobile or WiFi Only - BNIB
$149.00
![Samsung - T9 Portable SSD 4TB, Up to 2,000MB/s, USB 3.2 Gen2 - Black picture](/store/img/g/BIMAAOSwggpmhPvs/s-l225/Samsung-T9-Portable-SSD-4TB-Up-to-2-000MB-s-USB-3-.jpg)
Samsung - T9 Portable SSD 4TB, Up to 2,000MB/s, USB 3.2 Gen2 - Black
$229.85
![Samsung - S Pen Creator Edition - White picture](/store/img/g/nicAAOSwg8Nl-6GK/s-l225/Samsung-S-Pen-Creator-Edition-White.jpg)
Samsung - S Pen Creator Edition - White
$38.00
![Samsung Galaxy Tab A9+ 11.0](/store/img/g/qbUAAOSw1o1l1Rtt/s-l225/Samsung-Galaxy-Tab-A9-11-0-64GB-Gray-Wi-Fi-Tablet-.jpg)
Samsung Galaxy Tab A9+ 11.0" 64GB Gray Wi-Fi Tablet Bundle SM-X210NZAYXAR 2023
$149.99
![Samsung 27](/store/img/g/850AAOSwscNjyW-9/s-l225/Samsung-27-Ultra-Slim-LED-Curved-Monitor-HDMI-LC27.jpg)
Samsung 27" Ultra-Slim LED Curved Monitor HDMI (LC27F390FHN) ™
$95.99
![Samsung Chromebook 3 4GB 16GB SSD 11.6-Inch Laptop XE500C13-K02US HDMI WIFI picture](/store/img/g/ubUAAOSwBINleyTe/s-l225/Samsung-Chromebook-3-4GB-16GB-SSD-11-6-Inch-Laptop.jpg)
Samsung Chromebook 3 4GB 16GB SSD 11.6-Inch Laptop XE500C13-K02US HDMI WIFI
$39.59
![Samsung SM863a MZ7KM1T9HMJP 1.92TB 6Gb/s 2.5” SATA SSD Solid State MZ-7KM1T9N picture](/store/img/g/jGAAAOSwY51mfeFg/s-l225/Samsung-SM863a-MZ7KM1T9HMJP-1-92TB-6Gb-s-2-5-SATA-.jpg)
Samsung SM863a MZ7KM1T9HMJP 1.92TB 6Gb/s 2.5” SATA SSD Solid State MZ-7KM1T9N
$89.00
![Samsung Galaxy Tab S6 Lite SM-P613 64GB 10.4](/store/img/g/TQ8AAOSwFWRmhAra/s-l225/Samsung-Galaxy-Tab-S6-Lite-SM-P613-64GB-10-4-Oxfor.jpg)
Samsung Galaxy Tab S6 Lite SM-P613 64GB 10.4" Oxford Gray Tablet Bundle *READ*
$154.95
![Samsung Galaxy Tab A (2019) 32GB, Wi-Fi, 10.1in - Black picture](/store/img/g/7Z0AAOSwKEZmgjgX/s-l225/Samsung-Galaxy-Tab-A-2019-32GB-Wi-Fi-10-1in-Black.jpg)
Samsung Galaxy Tab A (2019) 32GB, Wi-Fi, 10.1in - Black
$50.00