Is there a Bit Torrent File/Server yet ?Originally Posted by aay
- removed some scsi modules from the regular knoppix26 (Kernel 2.6) startup
because they are unstable. Use "expert26" to load them.
- Added script for generating bootfloppies in Knoppix "Utilities" menu
- Harddisk installer update from Fabian Franz
- "knoppix splash" fixes
- timezone and language setting add-ons
- added linlinc1 for captive-ntfs for download capabilities
- changed some e100/eepro100 network driver entries in hardware detection
- the usual debian package updates
Is there a Bit Torrent File/Server yet ?Originally Posted by aay
hi you could find more downloads at this mirror page :
http://www.knopper.net/knoppix-mirrors/index-en.html
and for those use parameter "acpi=off" to boot kernel 2.6, you might also wish to try it with "acpi=ht"
Add acpi=ht, meaning run ACPI boot setup, but do not enable the interpreter.
A mirror that has the files ATM.
http://ftp.freenet.de/pub/ftp.uni-kl...linux/knoppix/
Torrent available from http://www.boegenielsen.dk:6969
Hi
as with the first 3.4 release I am not able to boot 2 PC's with the 2.6 kernel. Both of them boot properly with the 2.4 kernel.
With 2.6 the PC's freeze completely (not even Ctrl-Alt-Del work) on the network adapter:
...
Network device eth0 detected, DHCP broadcasting for IP
...
Both PC's have a Netgear FA310-TX card (DEC 2114x) which has worked with Xandros, Debian and Mandrake 10(with 2.6 kernel). With the 2.4 kernels it usually used the tulip driver from D.Becker but with Knoppix 3.4 and kernel 2.4 it actually uses:
...
eth0: DC21140 at 0xec00 (PCI bus 0, device 9), h/w address 00:40:05:42:c3:40,
and requires IRQ15 (provided by PCI BIOS).
de4x5.c:V0.546 2001/02/22 davies@maniac.ultranet.com
...
Will get Mandrake 10 back on one of these to see what they are using in their 2.6 kernel.
P.S. Mandrake 10 is using the tulip driver:
....
Linux Tulip driver version 1.1.13 (May 11, 2002)
PCI: Found IRQ 15 for device 0000:00:09.0
tulip0: EEPROM default media type Autosense.
tulip0: Index #0 - Media MII (#11) described by a 21140 MII PHY (1) block.
tulip0: MII transceiver #0 config 1000 status 782d advertising 01e1.
eth0: Digital DS21140 Tulip rev 34 at 0xec00, 00:40:05:42:C3:40, IRQ 15.
....
B
I'm no expert but maybe this will help.Originally Posted by bighusky
Knoppix 3.4 hung the first time I tried it and here's what worked for me (This is a combination of things I saw elsewhere in the forum
At boot: enter "linux26 knoppix noscsi"
This loads the Linux 2.6 kernel without SCSI detection, which is where Knoppix hung on my computer.
Is it possible to do an "upgrade" from the previous knoppix 3.4 iso to the current one without downloading the newer iso?
--
Brian
Unfortunately not. I guess, it would be possible to use rsync, if the image was compressed with an rsync-aware gzip (or zlib). This would increase the size of the image with a few percent. That could be a problem, because the size cannot grow much, if it should fit on a cd-rom
Well, not too worry, I have ADSL & rewriteable CDs!Originally Posted by tboege
But I think I'll wait a week or so until a more stable release of 3.4, rather than downloading a new one everyday!
regards
--
Brian
Matched Pair __ Intel Xeon Gold 6152 2.1Ghz 22-Core 140W CPU SR3B4
$209.95
HP Z420 Workstation Xeon E5-2690 v2 3ghz 10-Cores 64gb 240gb SSD 1TB Win10
$199.99
HP Z440 WORKSTATION XEON E5-1603V3 @ 2.80GHz, 16GB RAM 250 GB SSD Win 11
$119.99
Lenovo Thinkstation P510 E5-1620 V4 16GB RAM 512GB SSD DVD Quadro M2000 W10 Pro
$164.95
Intel Xeon E5-2697 V4 2.30 GHz 18C 2011-3 2400MHz 45MB 145W SR2JV CPU Processor
$49.99
SR1XP Intel Xeon E5-2680 v3 12 Core 30MB 2.5GHz LGA 2011-3 Grade A Processor
$4.50
Intel Xeon E5-2680 v4 2.4GHz 35MB 14-Core 120W LGA2011-3 SR2N7
$22.95
Intel Xeon Xeon E5-2697v2 @ 2.70GHz 12 Cores FCLGA2011 SR19H USED CONDITION
$23.94
Dell Precision 5810 Workstation Xeon E5-1650 6C 3.5GHz 16GB 500GB Win10 K2200
$124.67
Lenovo SR530 Server (Intel Xeon Silver 4110) (3x 800GB SSD) (NO OS) (48GB RAM)
$599.00