Is there a Bit Torrent File/Server yet ?Originally Posted by aay
- removed some scsi modules from the regular knoppix26 (Kernel 2.6) startup
because they are unstable. Use "expert26" to load them.
- Added script for generating bootfloppies in Knoppix "Utilities" menu
- Harddisk installer update from Fabian Franz
- "knoppix splash" fixes
- timezone and language setting add-ons
- added linlinc1 for captive-ntfs for download capabilities
- changed some e100/eepro100 network driver entries in hardware detection
- the usual debian package updates
Is there a Bit Torrent File/Server yet ?Originally Posted by aay
hi you could find more downloads at this mirror page :
http://www.knopper.net/knoppix-mirrors/index-en.html
and for those use parameter "acpi=off" to boot kernel 2.6, you might also wish to try it with "acpi=ht"
Add acpi=ht, meaning run ACPI boot setup, but do not enable the interpreter.
A mirror that has the files ATM.
http://ftp.freenet.de/pub/ftp.uni-kl...linux/knoppix/
Torrent available from http://www.boegenielsen.dk:6969
Hi
as with the first 3.4 release I am not able to boot 2 PC's with the 2.6 kernel. Both of them boot properly with the 2.4 kernel.
With 2.6 the PC's freeze completely (not even Ctrl-Alt-Del work) on the network adapter:
...
Network device eth0 detected, DHCP broadcasting for IP
...
Both PC's have a Netgear FA310-TX card (DEC 2114x) which has worked with Xandros, Debian and Mandrake 10(with 2.6 kernel). With the 2.4 kernels it usually used the tulip driver from D.Becker but with Knoppix 3.4 and kernel 2.4 it actually uses:
...
eth0: DC21140 at 0xec00 (PCI bus 0, device 9), h/w address 00:40:05:42:c3:40,
and requires IRQ15 (provided by PCI BIOS).
de4x5.c:V0.546 2001/02/22 davies@maniac.ultranet.com
...
Will get Mandrake 10 back on one of these to see what they are using in their 2.6 kernel.
P.S. Mandrake 10 is using the tulip driver:
....
Linux Tulip driver version 1.1.13 (May 11, 2002)
PCI: Found IRQ 15 for device 0000:00:09.0
tulip0: EEPROM default media type Autosense.
tulip0: Index #0 - Media MII (#11) described by a 21140 MII PHY (1) block.
tulip0: MII transceiver #0 config 1000 status 782d advertising 01e1.
eth0: Digital DS21140 Tulip rev 34 at 0xec00, 00:40:05:42:C3:40, IRQ 15.
....
B
I'm no expert but maybe this will help.Originally Posted by bighusky
Knoppix 3.4 hung the first time I tried it and here's what worked for me (This is a combination of things I saw elsewhere in the forum
At boot: enter "linux26 knoppix noscsi"
This loads the Linux 2.6 kernel without SCSI detection, which is where Knoppix hung on my computer.
Is it possible to do an "upgrade" from the previous knoppix 3.4 iso to the current one without downloading the newer iso?
--
Brian
Unfortunately not. I guess, it would be possible to use rsync, if the image was compressed with an rsync-aware gzip (or zlib). This would increase the size of the image with a few percent. That could be a problem, because the size cannot grow much, if it should fit on a cd-rom
Well, not too worry, I have ADSL & rewriteable CDs!Originally Posted by tboege
But I think I'll wait a week or so until a more stable release of 3.4, rather than downloading a new one everyday!
regards
--
Brian
ASRock B550M Pro SE AM4 DDR4 SATA 6Gb/s 1 PCIe 4.0 x16 Micro ATX Motherboard
$84.99
Gigabyte Z370P D3 ATX Z370 LGA1151 Motherboard (Support Intel 6/7th 8th 9th)
$59.99
ASUS H110M-R Motherboard Intel 6th/7th Gen LGA1151 DDR4 Micro-ATX i/o shield
$42.00
Asus H81M-C Intel LGA1150 DDR3 Desktop Motherboard MicroATX Socket H3
$23.99
Asus Prime H310M-A R2.0 Intel LGA 1151 DDR4 Desktop Motherboard
$54.99
MSI H81I LGA1150 MINI-ITX DDR3 Desktop Motherboard With I/O Shield
$32.99
ASRock H170 Pro4S Motherboard ATX Intel H170 LGA1151 DDR4 SATA3 HDMI
$39.99
MSI MAG Z590 TOMAHAWK WIFI Intel LGA1200 PCIE 4.0 WiFi 6E ATX Motherboard
$129.99
Gigabyte M-ATX motherboard with Intel Core i3 8100 CPU and 8GB DDR4 RAM
$84.00
ASUS PRIME Z690-P WIFI D4 ATX Motherboard Intel LGA1700 DDR4 HDMI
$99.99