Is there a Bit Torrent File/Server yet ?Originally Posted by aay
- removed some scsi modules from the regular knoppix26 (Kernel 2.6) startup
because they are unstable. Use "expert26" to load them.
- Added script for generating bootfloppies in Knoppix "Utilities" menu
- Harddisk installer update from Fabian Franz
- "knoppix splash" fixes
- timezone and language setting add-ons
- added linlinc1 for captive-ntfs for download capabilities
- changed some e100/eepro100 network driver entries in hardware detection
- the usual debian package updates
Is there a Bit Torrent File/Server yet ?Originally Posted by aay
hi you could find more downloads at this mirror page :
http://www.knopper.net/knoppix-mirrors/index-en.html
and for those use parameter "acpi=off" to boot kernel 2.6, you might also wish to try it with "acpi=ht"
Add acpi=ht, meaning run ACPI boot setup, but do not enable the interpreter.
A mirror that has the files ATM.
http://ftp.freenet.de/pub/ftp.uni-kl...linux/knoppix/
Torrent available from http://www.boegenielsen.dk:6969
Hi
as with the first 3.4 release I am not able to boot 2 PC's with the 2.6 kernel. Both of them boot properly with the 2.4 kernel.
With 2.6 the PC's freeze completely (not even Ctrl-Alt-Del work) on the network adapter:
...
Network device eth0 detected, DHCP broadcasting for IP
...
Both PC's have a Netgear FA310-TX card (DEC 2114x) which has worked with Xandros, Debian and Mandrake 10(with 2.6 kernel). With the 2.4 kernels it usually used the tulip driver from D.Becker but with Knoppix 3.4 and kernel 2.4 it actually uses:
...
eth0: DC21140 at 0xec00 (PCI bus 0, device 9), h/w address 00:40:05:42:c3:40,
and requires IRQ15 (provided by PCI BIOS).
de4x5.c:V0.546 2001/02/22 davies@maniac.ultranet.com
...
Will get Mandrake 10 back on one of these to see what they are using in their 2.6 kernel.
P.S. Mandrake 10 is using the tulip driver:
....
Linux Tulip driver version 1.1.13 (May 11, 2002)
PCI: Found IRQ 15 for device 0000:00:09.0
tulip0: EEPROM default media type Autosense.
tulip0: Index #0 - Media MII (#11) described by a 21140 MII PHY (1) block.
tulip0: MII transceiver #0 config 1000 status 782d advertising 01e1.
eth0: Digital DS21140 Tulip rev 34 at 0xec00, 00:40:05:42:C3:40, IRQ 15.
....
B
I'm no expert but maybe this will help.Originally Posted by bighusky
Knoppix 3.4 hung the first time I tried it and here's what worked for me (This is a combination of things I saw elsewhere in the forum
At boot: enter "linux26 knoppix noscsi"
This loads the Linux 2.6 kernel without SCSI detection, which is where Knoppix hung on my computer.
Is it possible to do an "upgrade" from the previous knoppix 3.4 iso to the current one without downloading the newer iso?
--
Brian
Unfortunately not. I guess, it would be possible to use rsync, if the image was compressed with an rsync-aware gzip (or zlib). This would increase the size of the image with a few percent. That could be a problem, because the size cannot grow much, if it should fit on a cd-rom
Well, not too worry, I have ADSL & rewriteable CDs!Originally Posted by tboege
But I think I'll wait a week or so until a more stable release of 3.4, rather than downloading a new one everyday!
regards
--
Brian
IBM System X3250 M3 Server 8GB RAM Intel Xeon x3440 2.53ghz (NO HDD)
$41.99
1U IBM x3550 M5 4 Bay SFF SAS3 Server 2x E5-2683 V3 28 Core 128GB DDR4 2x Tray
$318.00
IBM Power S822 8284-22A 12SFF Power8 3.89GHz 6Core 64GB RAM No HDD Server System
$314.99
IBM System X3650 Server M2 2 x Xeon X5570 2.93 Ghz w/128 GB/DVDRW
$111.95
IBM System x3550 M3 Dual Intel Xeon X5650 @2.67GHz 32GB RAM No HDD
$68.50
IBM x3650 M4 Server Intel Xeon E5-2640 (x2) 144GB RAM No HDDs (#4XN7N)
$169.99
IBM X3950 X6 8x E7-8891 v2 3.2GHz 10C 512GB Server
$490.00
IBM SYSTEM X3550 M4 7914AC1 Server INTEL XEON E5-2609 0 2.4GHz 8GB
$90.00
IBM 5362 Server System/36 60MB HDD With Manuals
$7700.00
IBM QRadar xx29 Server 4412Q2A
$209.99