Try typing in knoppix vga=normal xvrefresh=60 xmodule=ati screen=800x600 then enter enter key at the opening screen.Originally Posted by prophetikos
I am trying Knoppix on my second PC. Everything looks good at the first prompt. After hitting enter, the video output appears to be horizontally scrolling fast enough to create 5 or 6 columns of video. I have tried a few of the cheatcodes with no success. System info is below. Any ideas on what to do to fix this? If I can get it to work, I will make the hard disk install.
Thanks
Harold
128 Megabytes Memory
Board: Intel i440BX-W977TF
Bios: Award Software International, Inc. 4.51 PG 09/25/98
Processor:
350 megahertz Intel Pentium II
32 kilobyte primary memory cache
512 kilobyte secondary memory cache
Video:
ATI 3D Rage Pro (atir3) [Display adapter]
Standard VGA 800x600 [Monitor]
Try typing in knoppix vga=normal xvrefresh=60 xmodule=ati screen=800x600 then enter enter key at the opening screen.Originally Posted by prophetikos
That did the trick. I appreciate the quick response. I am new to the Linux platform so I've got a ways to go. Thanks again.
WD 4TB Gold Enterprise - 7200 RPM SATA 6Gb/s 128MB CACHE 3.5" HDD - WD4002FYYZ
$42.95
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Western Digital Gold Enterprise 4TB,7200 RPM Internal Hard Disk Drive WD4002FYYZ
$39.95
Hitachi 4TB 3.5" Hard Drive HUS724040ALE640 Ultrastar 7K4000 Internal 7.2K
$49.95
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$74.99
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
1TB HDD/SSD 2.5" SATA Hard Drive with Windows 10 or Windows 11 Pro Installed
$18.99
Seagate Exos X20 18TB SATA 6Gb/s 3.5" Enterprise Hard Drive - ST18000NM003D
$168.00
Western Digital DC HC320 Ultrastar 8TB 7200RPM SATA HD, HUS728T8TALE6L4, 0B36404
$99.00
SAS - HGST Ultrastar 7K4000 HUS724040ALA640 0F14688 3.5" 4TB 7.2K RPM 64MB HDD
$19.99