-
[newbie] resizing
Hi,
I'm going to attempt to install knoppix on the hdd but i need to resize my partitions at the moment my hard drive looks like this in QTparted
01 /dev/hda1 ntfs Active 9.09GB <---- windowsXP
02 /dev/hda2 extended 28.17GB
03 /dev/hda5 ntfs 28.17GB <---- Programs
04 /dev/hda-1 free 7.84MB
so i tryed resizing hda5 to 20.17GB but when i booted back into windowsXP it was still 28GB so i need to know how i resize it in Knoppix, Wat is the best way to have the hdd set up for knoppix and i still wanna keep windowsXP
-
Senior Member
registered user
That has to be one of the strangest partition layouts I've ever seen. In fact, if you could explain to me how it got that way I'd love to know. Perhaps you had other extended partitions that were deleted?
NOW you do realize that NTFS has a nasty habit of just leaving bits and bytes lying about wherever it wants right? (hmmm sounds alot like M$- I wonder why??)
SO you need to defrag the disc before resizing it. NO not just once or even twice but over and over again until it shows absolutely no change in file placement on the disc. (yes NTFS really is that bad of a file system and no there is no such thing as defrag in LInux but I digress...).
Even if M$ says the disc doesn't need to be defragged do it again!
REMEMBER: Never trust Microsoft!
anyway.....
Then you might be able to resize your partition(s). Again, I would prefer my partitions to be logical in numerical order but that's just me.
Personally (and realize I have never used XP but for 2 or 3 minutes at a time on a handful of occasions) I would copy your programs somewhere else and delete all of your partitions save /dev/hda1.
Please also stop rebooting no matter what you decide to do. Just have a look at your partition table w/ a very simple application called cfdisk. NO it isn't pretty and has nothing you can click but we don't care about that do we? We want functionality!!!
Open a terminal and start typing.....
Code:
sudo cfdisk /dev/hda
PLEASE post back if you have any questions at all OR you can also find FREE REALTIME help and alot of good people in #knoppix and/or #kanotix
-
lol, sorry I wouldn't have a clue how it got that way someone set it up for me and i reformated it when I reinstalled windows so it was probably somthing I did wrong. Anyway if I delete all the partitions how should I set them back up and wat program should I use to do it.
-
Senior Member
registered user
Well unless my math skills have taken leave it looks like you have a 40G drive so with that in mind perhaps something like....
10G Windows
10G FAT partition (can be used by both win & *nix for storage or...?)
7G Linux for /
5G Linux for /home
It is advisable to have 1G of system RAM and swap combined.
You can distribute the rest of the drive however you see fit or even just leave it alone for future use.
1) Install Windows just using only 10G for the install and it may be advisable to make the FAT partition under win too (although I think it won't really matter)
2) Install Linux and make your Linux partitions w/ a Linux utility like QTparted or cfdisk. Some people are scared off by the non-gui nature of cfdisk but I assure you it is extremely easy to use.
3) I don't believe the Knoppix installer is yet capable of putting /home on its own partition but this only requires a simple ediit of the configuration file .knofig.
Why do you want /home on its own partition? Well in the event that you need to reinstall Linux you can easily get it back to the state it was in before reinstallation. You won't have to retweak your desktop for example. It's quite handy.
Realize that when you install Linux it will rewrite your MBR and install a Linux boot loader that will allow you to easily select between win or *nix. It IS possible too use ntldr but I'm not familiar w/ the process. You can find docs here on the site.
HTH
-
one more thing.
if my windows partition is ntfs and i install my programs on the shared fat partition will they work
-
Senior Member
registered user
are these 'my programs' windows programs?
They should work.
Linux-programs shouldn't be started from a fat-partition, since it doesn's support the user/group/other difference, and flags for executable-files.
-
Senior Member
registered user
Originally Posted by
james
one more thing.
if my windows partition is ntfs and i install my programs on the shared fat partition will they work
Actually I was just referring to a fat partition as a place to store mp3's or divx or html docs or whatever you might want to share between os's.
I have no idea about launching winapps from a fat partition.
-
ok im pretty much set but wat do i edit in the knofig file to make it put /home on a different partition
-
Senior Member
registered user
Originally Posted by
james
ok im pretty much set but wat do i edit in the knofig file to make it put /home on a different partition
Piece of cake although I would like to point out that the name of the file is .knofig (not knofig). BIG huge difference there.
Code:
sudo knoppiix-installer
Configure an installation, when you finish w/ configure select Quit. Say YES to "save config?"
Code:
sudo xedit /ramdisk/home/knoppix/.knofig
*NOTE* The location of .knofig will vary depending on where kanotix-installer was launched from. If you can't find it simply do:
Code:
sudo updatedb
locate .knofig
Edit the line that reads HD_MAP=""
For example:
Code:
HD_MAP="/dev/hda2:/home"
Save and restart the installer. You do not need to "load config file"- it will automatically use /ramdisk/home/knoppix/.knofig
Once you've fired up the installer open another term and do:
You should see your partitions mounted on their respective directories for example:
Code:
/dev/hda1 on /mnt/hdinstall type ext3 (rw)
/dev/hda2 on /mnt/hdinstall/home type ext3 (rw)
This is opitonal BUT I would recommend using GRUB as your boot loader. lilo is FINE but grub is IMHO better so while you're editing .knofig anyway, why not simply switch 'lilo' to 'grub'
Be sure to install lilo or grub to mbr if you want a menu from which to select your os. IF for some reason the installatiojn fails and/or you're somehow left w/ an unbootable system fret not. The boot loader is easily reinstalled from cd. Boot Knoppix and join IRC for good, free and (usually) quick help. Surely there is at least one post here on how to do that as well.
Similar Threads
-
By downdogWoof in forum General Support
Replies: 8
Last Post: 05-08-2005, 05:50 AM
-
By downdogWoof in forum General Support
Replies: 1
Last Post: 02-25-2005, 09:46 PM
-
By dtopper in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 02-27-2004, 08:43 AM
-
By sminotti in forum Hdd Install / Debian / Apt
Replies: 4
Last Post: 07-23-2003, 01:49 AM
-
By xeerex in forum General Support
Replies: 0
Last Post: 07-14-2003, 08:19 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
CISCO 5108 Blade Server Chassis N20-C6508
$200.00
DELL POWEREDGE M620 SERVER BLADE INTEL XEON E5-2670 @ 2.60GHZ 128GB RAM 2X 146GB
$399.00
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell M630 PowerEdge Blade Server
$700.00
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
Dell PowerEdge M620 Blade Server
$39.99
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99