did you try pppoeconf?
I have to boot the knoppix 3.4 cd with knoppix no dhcp else it hangs when it times out trying to deal with dhcp.
I've tried everything I know (not much) to connect to the net.
On other distros/live cds I just need to activate the eth0 card as the router/modem takes care of eberything else.
how do i do this in knoppix?
Thanks in advance
did you try pppoeconf?
Thanks for the reply
ppoeconf is not necessary - nothing should need to be set up when connecting via a router/modem.
I just proved this after having an inspiration and plugging the router/modem directly into the PC's ethernet card and connecting to the 'Net immediately with no other action reqd.
When connected to the router/modem through my ethernet switch(home LAN), knoppix's DHCP Broadcast on boot times out.
Ant help re boot options to prevent this please?
Problem now fixed.
Had a moment of lucidity and disconnected cables from ethernet switch for 2nd and 3rd PC (not booted) . Lo and Behold, Knoppix 3.4 booted and gave me instant access to the 'Net.
Reconnected 2 cables and booted Knoppix again - All worked 100%.
Must have been a loosely connected cable at the switch for PC 2 or 3, and even if they were not switched on, Knoppix timed out trying to do a DHCP Broadcast. That's all I can think of given the circumstances.
IBM Server Rack Cabinet 9308-RC4
$209.00
IBM System X3250 M3 Server 8GB RAM Intel Xeon x3440 2.53ghz (NO HDD)
$36.53
IBM System p5 9131-52A 3.5" 4-Bay Server 80P6787 1 CPU 2GB 6 HD CADDIES TAPE BU
$250.00
$5000.00
IBM 8202-E4D Power 720 Server 3.6 GHz 4-Core (EPCK) IBM i V7R2 4x300gb HDD @15k
$596.25
IBM Power S822 8284-22A 12SFF Power8 3.89GHz 6Core 64GB RAM No HDD Server System
$359.99
IBM x3650 M4 Server Intel Xeon E5-2640 (x2) 144GB RAM No HDDs (#4XN7N)
$199.99
IBM BladeCenter HS20 8843 55U Server - 2x Intel Xeon 4GB RAM - NO HDDs
$26.85
1U IBM x3550 M5 4 Bay SFF SAS3 Server 2x E5-2683 V3 28 Core 128GB DDR4 2x Tray
$318.00
IBM Server System X3100 M4 | Xeon @ 3.10 Ghz | 8GB | 250GB HDD No OS (IG-PC26)
$112.95