When I boot from knoppix with no compact flash in /dev/hdc, I have no error messages. When I boot with the compact flash in /dev/hdc I get an error as follows:
Uncompressing Linux... Ok, Booting from the Kernel
Ide-scsi: hda: Unsupported command in request queue (0)
pdcraid: Error reading superblock
Ide-scsi: hda: Unsupported command in request queue (0)
pdcraid: Error reading superblock
Ide-scsi: hda: Unsupported command in request queue (0)
silraid: Error reading superblock
Then it loads knoppix-autoconfig with no problems, and I can even mount /dev/hdc with no problems and read/write to it. The system functions normally.
I cannot have the visuals of errors on the screen though, as this is for an installer CD.
I think it may display that message three times because I have three partitions on hdc (hdc1, hdc2 and hdc3).
Let me know if you have any ideas about this...
WF12F DELL 1TB 7.2K 6GBPS SATA 2.5'' HDD HARD DRIVE ST91000640NS 0WF12F
$25.00
$59.99
Seagate Exos X16 ST14000NM001G 14TB 512E SATA 6Gb/s 3.5" Enterprise Hard Drive
$169.99
785067-B21 HPE 300GB 12Gb/s 10K SAS 2.5" SC HDD Hard Drive 785410-001
$23.00
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$89.99
Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
$29.99
HGST Ultrastar HE10 HUH721010ALE600 10TB SATA 6Gb/s 7200RPM 3.5" Enterprise HDD
$69.99
HGST HUS724040ALS640 4TB 7200RPM 64MB Cache 6Gbps SAS 3.5" Hard Drive HDD SERVER
$19.99
2 PACK Seagate ST1000LM035 Mobile HDD 1TB 2.5" SATA III Laptop Hard Drive
$26.89
WD 16TB Elements Desktop, Certified Refurbished External Hard Drive - RWDBWLG...
$209.99