-
ISDN message HiSax load failed
Hi,
I got my Knoppix from PC-Welt Version 3.1
In use a Teles 16.3 ISA-card (not P&P) for my internet connection.
Works OK under Win98.
Starting ISDN-config giving all the parameters s.a. IRQ 10 IO 0xd180 and EDSS1
I filled out the provider and tried to start the connection.
At that moment a fault message tells me:
Laoding the HiSax mudule failed.
Is my CD defective or what? Can anybody give me a hint?
Thanks
-
Senior Member
registered user
No your CD isn't defective. A module is a driver.
The HiSax driver differs from the older Teles driver, particularly by a practical hardware check.
When the module can't be loaded there might be a hardware problem. I would look for the following:
Check /var/log/messages for messagesd relating to HiSax.
Possible error messages you might see:
HiSax: teles 16.3 config port d80-d88 already in use
The IO port is busy. Check with cat /proc/ioports.
kernel: HiSax: couldn't get interrupt 10
That would mean that the IRQ is busy or not responding.
------->If so try another free IRQ.
The port is not detected. The card is jumpered to 180 .
When you start ISDN config try this:
IRQ 11 IO 0xd80
-
Senior Member
registered user
Also check out /boot/24. <something, something> sorry I forgot the filename and see if your card is listed. I might check myself if I go back to Knoppix.
-
OK you were right.
It turned out to be IRQ 10 and IO 0xd80. Works fine now.
Seems linux does'nt bother about hardware setting in this case.
The card was jumpered at 0xd180.
Thanks for your tip.
-
Senior Member
registered user
Always glad to assist - thanks for posting back with results. Most people never bother to reply.
Similar Threads
-
By sopinon in forum General Support
Replies: 0
Last Post: 01-13-2005, 11:44 AM
-
By sopinon in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 01-13-2005, 12:06 AM
-
By n()()dle in forum General Support
Replies: 4
Last Post: 12-23-2004, 01:39 AM
-
By nxumdon in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 01-22-2004, 03:38 AM
-
By bsaunders in forum General Support
Replies: 2
Last Post: 11-24-2003, 07:27 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Oracle 7085209 LSI MegaRAID SAS 9361-8i 1GB Cache 12Gbps SAS/SATA PCIe RAID Card
$28.20
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA Controller Low Profile 9300-8i IT
$15.98
Oracle Sun 8-Port 6 Gbps SAS/SATA Raid Controller PCIe w/Cables 7055240 7047503
$13.49
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
G-Technology G-SPEED eS PRO 4-Bay Mini-SAS RAID Array 0G02057
$99.99