Try hitting Ctrl+D to bring up the "Virtual Machine Control Panel," click on the "Options" tab, click on "Advanced," and make sure the checkbox next to "Disable acceleration" is checked.
I am trying Knoppix-3.4 boot under VMware-4.0 workstation on Windoz-XP box.
I can boot the system when kernel-2.4.26 is used.
I fails when kernel chosen is knoppix26 (2.6.5), is it a known issue? Is there
a work around for this?
Thanks in advance,
-ishwar
Try hitting Ctrl+D to bring up the "Virtual Machine Control Panel," click on the "Options" tab, click on "Advanced," and make sure the checkbox next to "Disable acceleration" is checked.
i read this on french forum :
it's an update
http://ftp.cvut.cz/vmware/vmware-any...pdate65.tar.gz
tar xvzf vmware-any-any-update65.tar.gz
cd vmware-any-any-update65/
./runme.pl
--FYI, they are up to "update67" as of this writing. ( http://ftp.cvut.cz/vmware/vmware-any...pdate67.tar.gz )
--Anybody know if this also applies to vmware 3.x, and not only 4.x?
Originally Posted by pc3
Dell EMC 092GD6 Broadcom 9305-16i LSI Quad Port 4 Port SAS RAID Controller
$84.99
ORICO 5 Bay Raid USB3.0 to SATA External Hard Drive Enclosure for 3.5'' HDD LOT
$134.39
OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire
$36.99
ASUS Hyper M.2 x16 Gen 4 RAID Card- Used Working
$32.95
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 4Y5H1 High Profile
$17.99
LSI 8 Port 6Gbps PCIe 3.0 External SAS RAID Card w/ 1GB CacheVault & Low Profile
$24.65
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Dell H310 SATA SAS RAID Controller Card - HV52W with 1 SFF-8087 Cable, IT Mode
$20.00
ORICO 5 Bay Raid Enclosure USB3.0 SATA External Hard Drive Enclosure Up to 80TB
$42.49
Yottamaster 5 Bay RAID Hard Drive Enclosure Type-C B For 2.5" 3.5" SATA HDD SSDs
$139.99