Hi,
I am using the FAQ advised method to boot knoppix 3.4 from an ISO copied to the HD.
Using 'winimage' revealed that the following files were 'in' a folder called /boot/isolinux/ in the ISO: linux24, linux26, minirt24.gz and minirt26.gz.
I guess that the '24' and '26' refer to the 2.4 and 2.6 kernels?
As advised in the FAQ (with slight modification) I used the following command:
loadlin.exe linux24 root=/dev/hda1 initrd=minirt24.gz lang=en ro
And booted into knoppix without any problem - great!
But, when I tried the following command:
loadlin.exe linux26 root=/dev/hda1 initrd=minirt26.gz lang=en ro
The boot process fell over with the error message:
kernel panic: attempt to kill init!
Can anyone advise why this problem occurred and how to fix it?
Regards,
Geoff.
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
Intel PCIe SSD AIC RAID Controller Card G97168-252
$44.55
Oracle 7085209 LSI MegaRAID SAS 9361-8i 1GB Cache 12Gbps SAS/SATA PCIe RAID Card
$28.20
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRaid 9361-8i 12Gbps SAS / SATA Raid Controller PCIe x8 3.0 Tested
$29.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
Oracle Sun 8-Port 6 Gbps SAS/SATA Raid Controller PCIe w/Cables 7055240 7047503
$13.49
G TECHNOLOGY G RAID 0G04228 2-Bay Thunderbolt 2 RAID Array W/Power Supply
$99.99
4 Bay RAID External Hard Drive Enclosure for 2.5/3.5" SATA HDD/SSD
$79.99