Anyone have an idea. I am lost here.
When trying to do a hard drive install of version 3.4 it works fine until it tried to create a initrd.img file for the 2.6.6 Kernel:
Thus created a 0 length file called initrd.img-2.6.6. When it reboots after the HD install it fails with a kernel panicCode:/usr/sbin/mkinitrd: add_modules_2_5: modprobe failed FATAL: Module sd_mod not found
The Knoppix-installer works fine on other machines, but when I try it on my dell poweredge 2600 it fails. I know there is a module called sd_mod.ko. I guess this was not included on the origonal knoppix cd. It should be under /lib/modules/2.6.6/kernel/drivers/scsi/sd_mod.ko, but it does not exist. Was this supposed to be included? if yes, why is it not there? Was this one of the SCSI drivers that was causing problems with hte 5/4 relase of 3.4?
Any help withy this would be great.
Thanks
Anyone have an idea. I am lost here.
CISCO 5108 Blade Server Chassis N20-C6508
$200.00
DELL POWEREDGE M620 SERVER BLADE INTEL XEON E5-2670 @ 2.60GHZ 128GB RAM 2X 146GB
$399.00
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell M630 PowerEdge Blade Server
$700.00
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
Dell PowerEdge M620 Blade Server
$39.99
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99