Knoppix installed from CD only recognizes and works with my Xircom 10/100 ethernet card. But when I installed it to the hard drive, it fails to work. I'm new to all this, so it has been a frustrating few days.
The bootup process reports this:
1. Network check eth0
2. Network stop eth0
3. sbin/pump -r -i eth0
4. Operation failed
5. /sbin/ifconfig eth0 down
6. modprobe -r xirc2ps_cs
7. exiting
...open_sock (0) failed, etc
Once booted,
cardctl ident
correctly reports the Xircom card in the slot, so it seems the pcmcia slot is working.
I'd sure appreciate any help from here!
--Brent
Gigabyte Z370P D3 ATX Z370 LGA1151 Motherboard (Support Intel 6/7th 8th 9th)
$59.99
ASRock B550M Pro SE AM4 DDR4 SATA 6Gb/s 1 PCIe 4.0 x16 Micro ATX Motherboard
$84.99
ASUS H110M-R Motherboard Intel 6th/7th Gen LGA1151 DDR4 Micro-ATX i/o shield
$42.00
MSI H110M pro-vd 6th/7th Gen Intel DDR4 MATX Motherboard NO I/O SHIELD
$35.00
Asus H81M-C Intel LGA1150 DDR3 Desktop Motherboard MicroATX Socket H3
$23.99
Asus Prime H310M-A R2.0 Intel LGA 1151 DDR4 Desktop Motherboard
$54.99
MSI H81I LGA1150 MINI-ITX DDR3 Desktop Motherboard With I/O Shield
$32.99
GIGABYTE GA-X99-UD4P MOTHERBOARD, M.2 SATA3, LGA2011-3, DDR4, & I/O Shield
$69.99
Gigabyte M-ATX motherboard with Intel Core i3 8100 CPU and 8GB DDR4 RAM
$84.00
ASUS PRIME Z270-P Motherboard || Kit with/ Intel G3900 and 4 GB RAM
$36.59