Knoppix installed from CD only recognizes and works with my Xircom 10/100 ethernet card. But when I installed it to the hard drive, it fails to work. I'm new to all this, so it has been a frustrating few days.
The bootup process reports this:
1. Network check eth0
2. Network stop eth0
3. sbin/pump -r -i eth0
4. Operation failed
5. /sbin/ifconfig eth0 down
6. modprobe -r xirc2ps_cs
7. exiting
...open_sock (0) failed, etc
Once booted,
cardctl ident
correctly reports the Xircom card in the slot, so it seems the pcmcia slot is working.
I'd sure appreciate any help from here!
--Brent
Seagate Exos X16 (7200RPM, 3.5", SATA III, 256MB Cache) 16TB Internal Enterprise
$110.00
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$41.62
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$79.99
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$93.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$110.00
HGST Ultrastar HE10 10TB SATA 6.0Gb/s 7200 3.5" Datacenter HDD - HUH721010ALE601
$79.99
Western Digital DC HC320 Ultrastar 8TB 7200RPM SATA HD, HUS728T8TALE6L4, 0B36404
$99.00
Western Digital WD4000FYYZ RE 4TB 7200 RPM 64MB Cache SATA 6Gb/s 3.5" Hard Drive
$24.09